Manual

Digital Phosphor Oscilloscopes
•
www.tektronix.com/tds5000b
6
Digital Phosphor Oscilloscopes
TDS5000B Series
Characteristics
Vertical System
TDS5032B/ TDS5034B TDS5052B/ TDS5054B/ TDS5104B
TDS5054BE
Input Channels 2/4 2/4/4 4
Analog Bandwidth (–3 dB) 350 MHz 500 MHz 1 GHz
5 mV/div – 1 V/div
Calculated Rise Time 5 mV/div (typical) 1.15 ns 800 ps 300 ps
Hardware Bandwidth Limits 150 MHz or 20 MHz
Input Coupling AC, DC, GND
Input Impedance, 1 MΩ ±1%
Input Impedance, 50 Ω ±1% ±1% ±2.5%
Input Sensitivity, 1 MΩ 1 mV/div to 10 V/div
Input Sensitivity, 50 Ω 1 mV/div to 1 V/div
Vertical Resolution 8-bits (>11-bits w/ averaging)
Max Input Voltage, 1 MΩ 150 V CAT I, ≤ 400 V peak. Derate at 20 dB/decade to 9 V
RMS
above 200 kHz
Max Input Voltage, 50 Ω 5 V
RMS
with peaks <±30 V 5 V
RMS
with peaks <±30 V <100 mV/div <1 V
RMS
≥100 mV/div <5 V
RMS
DC Gain Accuracy 1.5% with offset set to 0 V
Offset Range, 1 MΩ 1 mV/div – 99.5 mV/div ±1 V
100 mV/div – 1 V/div ±10 V
1.01 V/div – 10 V/div ±100 V
Offset Range, 50 Ω 1 mV/div – 99.5 mV/div ±1 V 1 mV/div – 99.5 mV/div ±1 V 1 mV/div – 50 mV/div ±0.5 V
100 mV/div –1 V/div ±10 V 100 mV/div –1 V/div ±10 V 50.5 mV/div – 99.5 mV/div ±0.25 V
100 mV/div – 500 mV/div ±5 V
505 mV/div – 1 V/div ±2.5 V
Channel-to-Channel Isolation for Any ≥100:1 at ≤100 MHz and ≥30:1 at >100 MHz up to the rated bandwidth
Two Channels at Equal Vertical Scale
Timebase System
All Models
Timebase Range 200 ps/div to 1000 s/div
Timebase Delay Time Range (s/div x –10) to 1000 s
Channel-to-Channel Deskew Range ±75 ns
Timebase Accuracy 15 ppm
∆ Time Measurement Accuracy (0.06/sample rate + 15 ppm x |Reading|)
RMS
Trigger Jitter (RMS) 8 ps
RMS
(typical)
Long Term Sample Rate and Delay Time Accuracy ±15 ppm over any ≥1 ms interval