Owner manual

Video Measurement • www.tektronix.com/video
13
Automated Video Measurement Set
VM5000
Display Characteristics
Display Type –
10.4-inch Liquid crystal active-matrix color display.
Display Resolution –
640 horizontal x 480 vertical pixels.
Waveform Styles –
Vectors,Dots, Intensified Samples,Variable
Persistence, Infinite Persistence.
Display Format – YT, XY, XYZ.
Computer System
and Peripherals
Operating System – Microsoft Windows 2000.
CPU – Intel Celeron Processor, 2.0 GHz.
PC System Memory – 512 MB.
Internal Hard Disk Drive – ≥80 GB capacity.
Floppy Disk Drive –
Front panel 3.5-inch floppy disk drive,
1.44-MB capacity.
CD-RW Drive –
Side panel CD-RW drive, ≥24X read and
write speed.
Mouse – Optical wheel mouse, USB interface.
Input/Output Ports
Video Input –
Front panel BNC connectors (3) for 3-wire CAV.A
fourth BNC for separate composite sync or H sync
input on RGBHV signals.A fifth BNC (auxiliary input)
for V sync on RGBHV signals.Trigger level range is
adjustable from +8 V to –8 V.The maximum input
voltage is ±20 V (DC + peak AC) and input resist-
ance is ≥1.5 kΩ.
External Reference In –
Rear-panel BNC connector. 9.8 MHz to 10.2 MHz.
Parallel Port – IEEE 1284,DB-25 connector.
Audio Ports –
Miniature phone jacks for stereo microphone input
and stereo line output.
USB Port –
Two USB 2.0 ports allow connection or disconnec-
tion of USB keyboard and/or mouse while oscillo-
scope power is on.
Keyboard Port – PS-2 compatible.
Mouse Port – PS-2 compatible.
LAN Port –
RJ-45 connector,supports 10Base-T and 100Base-T.
Serial Port – DB-9 COM1 port.
Video Port –
DB-15 female connector; connect a second monitor
to use dual-monitor display mode. Supports basic
requirements of PC99 specification and display
resolutions up to 1,920x1,440.
GPIB Port –
IEEE 488.2 standard, can be configured for
talk/listen or controller mode.
Oscilloscope VGA Video Port –
DB-15 female connector,connect to show the oscil-
loscope display on an external monitor or projector.
Power Source
Power –
100 to 240 V
RMS
±10%, 47 to 63 Hz; CAT II,
or 115 V
RMS
±10%, 360 to 440 Hz.
Power Consumption – <220 W.
Physical Characteristics
Benchtop Configuration
Dimensions mm in.
Height 361 14.2
Width 447 17.6
Depth 288 11.35
Weight kg lbs.
Net 11.23 24.75
Shipping 25.63 56.5
Rackmount Configuration
Dimensions mm in.
Height 267 10.5
Width 483 19
Depth 288 9.1*
1
Weight kg lbs.
Net 13.53 29.75
Cooling
Cooling Clearance 3 inches (76 mm)
required on left side
*1
From rack mounting ear to back of instrument.
Environmental
Temperature
Operating – +5 ºC to +45 ºC.
Nonoperating –
–20 ºC to +60 ºC without diskette in floppy drive.
Humidity
Operating –
20% to 80% relative humidity with a maximum wet
bulb temperature of +29 ºC at or below +45 ºC,
noncondensing. Upper limit derates to 30% relative
humidity at +45 ºC.
Nonoperating –
Without diskette in floppy disk drive. 5% to 90%
relative humidity with a maximum wet bulb tempera-
ture of +29 ºC at or below +60 ºC, noncondensing.
Upper limit derates to 20% relative humidity at
+60 ºC.
Altitude
Operating – 10,000 ft. (3,048 m).
Nonoperating – 40,000 ft. (12,190 m).
Random Vibration
Operating –
0.1 GRMS from 5 to 500 Hz, 10 minutes each axis,
3-axes, 30 minutes total.
Nonoperating –
2.0 GRMS from 5 to 500 Hz, 10 minutes each axis,
3-axes, 30 minutes total.
Regulatory Certifications
Electromagnetic Compatibility – 89/336/EEC.
Safety –
UL61010, CSA-22.2 No. 1010.1,EN61010-1,
IEC61010-1.