Owner manual

Video Measurement • www.tektronix.com/video
15
Automated Video Measurement Set
VM5000
Power Plug Options
Opt. A0 – North America Power.
Opt. A1 – Universal EURO Power.
Opt. A2 – United Kingdom Power.
Opt. A3 – Australia Power.
Opt. A4 – 240 V, North America Power.
Opt. A5 – Switzerland Power.
Opt. A6 – Japan Power.
Opt. A10 – China Power.
Opt. A99 – No Power Cord or AC Adapter.
Manual Options
Opt. L0 – English Manual.
Opt. L1 – French Manual.
Opt. L3 – German Manual.
Opt. L4 – Spanish Manual.
Opt. L5 – Japanese Manual.
Opt. L7 – Simplified Chinese Manual.
Opt. L8 – Traditional Chinese Manual.
Opt. L9 – Korean Manual.
Opt. L10 – Russian Manual.
Service Options
Opt. C3 – Calibration Service 3 Years.
Opt. C5 – Calibration Service 5 Years.
Opt. D1 – Calibration Data Report.
Opt. D3 – Calibration Data Report 3 Years
(with Option C3).
Opt. D5 – Calibration Data Report 5 Years
(with Option C5).
Opt. R3 – Repair Service 3 Years
(including warranty).
Opt. R5 – Repair Service 5 Years
(including warranty).
Instrument Upgrades (VM5UP)
Opt. 1R – Rackmount kit.
Opt. 3EA – TDSJIT3 v2.0; upgrade from J3E;
requires JE3.
Opt. 3EE – TDSJIT3 v2.0; essentials; upgrade from
J3E; requires JE3.
Opt. CP2
*2
– TDSCPM2 – ANSI/ITU telecom pulse
compliance testing software.
Opt. E3A – TDSJIT3 v2.0; upgrade from JE3;
requires JT3.
Opt. ET3 – TDSET3; Ethernet compliance
test software.
Opt. HD – HD Component analog video measure-
ments and format support.
Opt. IF – Upgrade installation service.
Opt. J2 – TDSDDM2: Disk drive measurements
software.
Opt. JE3 – TDSJIT3 v2.0 Essentials; Advanced
Jitter and timing analysis software.
Opt. JA3 – TDSJIT3 v2.0; Advanced Jitter and
timing analysis software.
Opt. JTA – TDSJIT3 v2.0; Advanced Jitter and
timing analysis software; requires JT3.
Opt. PW3 – TDSPWR3: Power measurements
software.
Opt. SD – SD component analog video measure-
ments and format support.
Opt. SM – Communication mask testing.
Opt. USB – TDSUSBS; USB 2.0 Compliance test
software only.
Opt. VGA – RGBHV Video Measurements and VESA
Compliance Tests.
*
2
Requires option SM.
Upgrades equivalent to original options can be
ordered to extend instrument performance after
initial purchase. Users can install upgrades without
opening the instrument case or requiring on-site
service.To upgrade a VM5000, order a VM5UP
with one or more of the options listed above.
Factory installation is available by specifying Option
IF. For older VM5000HD instrument upgrades order
VM5HDUP with one or more of the following options:
2A, 3EE, 3EA,E3A, IF, J2, JA3, JE3,JTA, PW3, SD,
USB,VGA. Additional or replacement test signals
and other standard accessories can be ordered
separately via part number.