Owner's manual

Advanced Test Solutions for EMC
10 kHz to 400 MHz 110 Watt
Class a BroadBand aMplifier
CBa 400M-110
Technical specifications
Frequency range 10 kHz to 400 MHz
Rated output power 100 W minimum
Output power at 1 dB gain compression 80 W minimum
110 W typical below 100 MHz
Gain (nominal) 51 dB
Third order intercept point
1
61 dBm
Gain variation with frequency ±2 dB
Harmonics at 80 W output power Better than -20 dBc
Output Impedance 50 Ohms
Stability Unconditional
Output VSWR tolerance
2
Innity:1
Input VSWR 2:1
RF connector style
Input Type N female
Output Type N female
Safety interlock Dual input, O/C and/or S/C to mute
USB interface Optional
Supply voltage 100 to 240 Vac (+/- 10%)
Supply frequency range 45 to 63 Hz
Supply power <1 kVA (typical 700 VA)
Mains connector Appropriate IEC 60309 plug (see options)
Conducted and radiated emissions EN61326 Class A
Conducted and radiated immunity EN61326: 1997 table 1
Mains harmonic currents EN61000-3-2
Voltage uctuations and icker EN61000-3-3
Safety EN61010-1
Case dimensions 19 inch, 4U case, 440 mm deep
Mass 18 kg
Operating temperature range 0 to 40°C
Options (select at time of ordering)
341-745 Bench model with front panel mounted input/output connectors
341-845 Rack mountable with front panel mounted input/output connectors
341-945 Rack mountable with rear panel mounted input/output connectors
Notes:
1. The third order intercept point is a nominal value, as its calculation depends upon the power level at
which distortion measurements are made.
2. Output VSWR tolerance is specied for excitation within the permitted levels and frequency range.
© July 2011 Teseq
®
Specifications subject to change without notice.
Teseq
®
is an ISO-registered company. Its products
are designed and manufactured under the strict
quality and environmental requirements of the ISO
9001. This document has been carefully checked.
However, Teseq
®
does not assume any liability for
errors or inaccuracies.
Teseq AG
Nordstrasse 11F 4542 Luterbach Switzerland
T + 41 32 681 40 40 F + 41 32 681 40 48
[e-mail] www.teseq.com
691-278A August 2011