- 16/32 Port Modular MatrixTM KVM Switch User Manual

3. Connect the KM0216 / KM0432 to the KVM Adapter Cable

Use Cat. 5 cable to connect any available CPU Port to a KVM adapter cable

that is appropriate for the computer you are installing (see the table on p. 4

for details).

Note: The distance between the KM0216 / KM0432 and the KVM Adapter

Cable must not exceed 150m (500’).

4. Connect the KVM Adapter Cable to the Computer.

Plug the connectors on the KVM cable into the appropriate ports of the

computer you are installing.

Note: Repeat steps 3 and 4 for all the computers you wish to connect. Up

to 32 computers can be connected in this fashion.

5. After all your computers have been cabled up, plug the female end of the

power cord into the KM0216 / KM4032’s Power Socket; plug the male end

into an AC power source.

6. For each Console Module, plug its power adapter into an AC source; plug

the power adapter cable into the unit’s power jack.

7. Turn on the power to the KM0216 / KM0432.

8. Turn on the power to the computers.

2004-08-04