- 16/32 Port Modular MatrixTM KVM Switch User Manual

To set up a Physical Interface Cascade, refer to the installation diagram on p.

25, and do the following:

1. Make sure that power to all the devices you will be connecting up has been

turned off.

2. Use Cat 5 cable to connect any available CPU Port on the First Stage unit

(the KM0216 / KM0432) to a PS/2 style KVM adapter cable (as described

in the Cables section, p. 4); plug the adapter cable’s KVM connectors to the

Keyboard, Video, and Mouse Console ports of the KH0116.

Note: The distance between the Second Stage unit and the KM0216 /

KM0432 must not exceed 150m (500’).

3. Use KVM cable sets (as described in the Cables section of the KH0116’s User

Manual), to connect any available CPU port on the Second Stage unit to the

Keyboard, Video, and Mouse ports of the computers you are installing.

4. Plug the KH0116’s power cord into an AC source and into the switch’s

Power Socket.

5. Repeat steps 2 - 4 for any other top level Second Stage units you wish to

connect.

6. Turn on the power for the First Stage unit; turn on the power for all Second

Stage units; turn on the power to all the computers.

Note: If you are daisy chaining KH0116s, follow the instructions provided

in the KH0116 User Manual for chaining. Power on each chain

according to the instructions in the manual.

2004-08-04