- 16/32 Port Modular MatrixTM KVM Switch User Manual

The Administrator’s power is limited to only that segment of the installation
that the KM0216 / KM0432 he is logged in on controls. He can assign and
change passwords and access rights for all operators on his segment.
Both Super Administrator and Administrator have full User rights. The four
Users have no administrative rights. Depending on the permissions granted by
the Super Administrator or Administrator, Users have varying degrees of
control over the computers on the installation: Full Access; View Only; No
Access. These rights are assigned on a port-by-port basis.
Operators (Super Administrator, Administrators, and Users) on the Master
KM0216 / KM0432 can have User access rights to all ports on the Slave
KVMs. Access rights are given by the Super Administrator or Administrator
with the USER BUS AUTHORIZATION function (see p. 45).
The operators on Slave KVMs can only access computers on their segment.
This includes any computers connected to KVM switches that are cascaded
down from the KM0216 / KM0432 they are logged in on.
2004-08-04
33