- 16/32 Port Modular MatrixTM KVM Switch User Manual

OSD Main Screen Headings
Heading Explanation
SN This field shows the Station Number that the currently selected port is
connected to. The first number is the Station’s position in the chain;
the second number shows the total number of stations in the chain.
PN This column lists the Port Numbers for all the CPU ports on the
installation. The simplest method to access a particular computer is
move the Highlight Bar to it, then press Enter.
QV If a port has selected for Quick View scanning (see Set Quick View
Ports, p. 3-44), an arrowhead displays in this column to indicate so.
The computers that are powered on and are On Line have a Sun
symbol in this column to indicate so.
NAME If a port has been given a name (see Edit Port Names, p. 43), its
name appears in this column.
OSD Navigation
Use the following procedures to navigate through OSD menus:
w To dismiss the Main Screen, and deactivate OSD, Click the X at the upper
right corner of the OSD Window; or press [Esc].
w To Logout, Click F8 at the top of the Main Screen, or press [F8].
w To move up or down through the list one line at a time, Click the Up and
Down Triangle symbols (
▲▼) or use the Up and Down Arrow Keys. If there
are more list entries than there is room for on the Main Screen, the screen
will scroll.
w To move up or down through the list one screen at a time, Click the Up and
Down Arrow symbols (éê), or use the [Pg Up] and [Pg Dn] keys. If there
are more list entries than there is room for on the Main Screen, the screen
will scroll.
w To activate a port, Double Click it, or move the Highlight Bar to it then
press [Enter].
w After executing any action, you automatically go back to the menu one level
above.
2004-08-04
37