- 16/32 Port Modular MatrixTM KVM Switch User Manual

OSD Functions
OSD functions configure and control the OSD. Examples of what can be
accomplished with the OSD include: rapidly switching to any port; auto
scanning specifically selected ports; limiting the list of ports you wish to view;
designating a port as a Quick View Port; managing port names; user
management, system administration, and making OSD setting adjustments.
To access an OSD function:
1. Either Click a Function Key field at the top of the Main Screen, or press a
Function Key on the keyboard.
2. In the Submenus that appear make your choice either by Double Clicking it,
or moving the Highlight Bar to it, then pressing [Enter].
3. Press [Esc] to return to the previous menu level.
A complete description of the KM0216 / KM0432’s OSD operations are given in
the sections that follow.
F1 GOTO:
GOTO allows you to switch directly to a port either by keying in the port’s
Name, or its Port ID.
w To use the Name method, key in 1; key in the port’s Name; then press
[Enter].
w To use the Port ID method, key in 2; key in the Port ID; then press [Enter].
w Key in 3, to go to a Station on the installation other than the ones connected
to the Station you are logged in on (see Bus Authorization, p. 45). Only an
authorized operator at the Master Station (the top level KM0216 / KM0432)
can use this function.
Note: You can key in a partial Name or Port ID. In that case, the screen will
show all the computers that the User has View rights to (see SET
ACCESSIBLE PORTS, p. 44), that match the Name or Port ID pattern,
regardless of the current List settings (see F2 LIST, p. 39, for details).
To return to the OSD Main Screen without making a choice, press [Esc].
2004-08-04
38