- 16/32 Port Modular MatrixTM KVM Switch User Manual

F4 ADM:

F4 is a Super Administrator and Administrator only function. It allows them to

configure and control the overall operation of the OSD. To change a setting

Double Click it; or use the Up and Down Arrow Keys to move the highlight bar

to it then press [Enter].

After you select an item, a submenu with further choices appears. Double Click

the choice you want, or move the Highlight Bar to it then press [Enter]. An

icon appears before the selected choice to indicate which one it is. The settings

are explained in the following table:

Note: All your setting changes are stored in temporary memory and remain in

effect for the duration of your session. The changes only become

permanent when you Log out of the OSD (see p. 49). If you shut down the

KM0216 / KM0432 without first logging out, your changes are discarded.

Setting Function

SET

USERNAME

AND

PASSWORD

This function is used to set Usernames and Passwords:

1. One Super Administrator, one Administrator, and four User

passwords can be set.

2. After you key in a name for the Super Administrator, Administrator,

or User, a screen that allows you to key in the username and

password appears. The username and password may be up to 15

characters long, and can consist of any combination of letters and

numbers (A - Z, 0 - 9).

3. For each individual, key in the Username and Password, then

press [Enter].

4. To modify or delete a previous Username and/or Password,

use the backspace key to erase individual letters or numbers.

SET LOGOUT

TIMEOUT

If there is no input from the console for the amount of time set with

this function, the Operator is automatically logged out. A login is

necessary before the console can be used again.

This enables other Operators to gain access to the computers when

the original Operator is no longer accessing them, but has forgotten

to log out. To set the timeout value, key in a number from 1 - 180

minutes, then press [Enter]. If the number is 0 [zero], this function

is disabled.

The default is 0 (disbabled).

(Table continues on next page)

2004-08-04