- 16/32 Port Modular MatrixTM KVM Switch User Manual

(F4 ADM: continued)

Setting Function

EDIT PORT

NAMES

To help remember which computer is attached to a particular port,

every port can be given a name. This function allows the

Administrator to create, modify, or delete port names. To Edit a port

name:

1. Click the port you want, or use the Navigation Keys to move

the highlight bar to it, then press [Enter].

2. Key in the new Port Name, or modify/delete the old one. The

maximum number of characters allowed for the Port Name is

15. Legal characters include:

w All alpha characters: a - z; A - Z

w All numeric characters: 0 - 9

w + - / : . and Space

Case does not matter; the OSD displays the Port Name in all

capitals no matter how they were keyed in.

3. When you have finished editing, press [Enter] to have the

change take effect. To abort the change, press [Esc].

RESTORE

DEFAULT

VALUES

This function is used to undo all changes and return the setup to the

original factory default settings (see FACTORY DEFAULT

SETTINGS, p. 71) - except for the Names settings that were

assigned to the Ports, which are saved.

CLEAR THE

NAME LIST

This function is similar to Restore Default Values. The difference is

that it also clears the Names settings along with undoing all

changes and returning the setup to the original factory default

settings.

ACTIVATE

BEEPER

Choices are Y (for Yes), or N (for No). When activated, the beeper

sounds whenever a Port is changed; when activating the Auto Scan

function (see F7 SCAN, p. 48); or an invalid entry is made on an

OSD menu. The default is Y (activated).

(Table continues on next page)

2004-08-04