- 16/32 Port Modular MatrixTM KVM Switch User Manual

F5 SKP:
This function enables you to easily skip backward or forward - switching the
console focus from the currently active computer port to the previous or next
available one.
w The selection of computers to be available for Skip Mode switching is made
with the Scan/Skip Mode setting under the F3 SET function (see p. 41).
w When you are in Skip Mode, press [ ← ] to switch to the previous computer
in the List; press [ → ] to switch to the next computer in the List; press [ ↑ ]
to switch to the last computer on the previous station in the List; press [ ↓ ]
to switch to the first computer on the next station in the List.
Note: When you Skip, you only Skip to the the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 41).
w When the focus switches to a Port has been selected for Scan/Skip Mode, a
Left/Right Triangle symbol appears before its Port ID Display to indicate so.
w While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
w To exit Skip Mode, press [Spacebar] or [Esc].
2004-08-04
46