- 16/32 Port Modular MatrixTM KVM Switch User Manual

Skip Mode
This feature allows you to switch between computers in order to monitor them
manually. In contrast to Auto Scanning, which automatically switches after a
fixed interval, Skip Mode lets you dwell on a particular port for as long or as
little as you like. To invoke Skip Mode, key in the following Hotkey
combination:
1. Invoke HKM (see p. 51).
2. Key in [Arrow]
w Where [Arrow] refers to one of the Arrow keys. After you press [Arrow],
you automatically exit HKM, and enter Skip Mode where you can switch
ports as follows:
←
Skips from the current port to the first accessible port
previous to it. (See Scan/Skip Mode, p. 3-41, for information
regarding accessible ports.)
→
Skips from the current port to the next accessible port.
↑
Skips from the current port to the last accessible port of the
previous Station.
↓
Skips from the current port to the first accessible port of the
next Station.
w Once you are in Skip Mode, you can keep on skipping by pressing the
Arrow keys. You don’t have to use the [NumLock] + [
*
] combination
each time you want to skip.
w While Skip Mode is in effect, ordinary keyboard and mouse functions
are suspended - only Skip Mode compliant keystrokes can be input. You
must exit Skip Mode in order to regain normal control of the console.
3. To exit Skip Mode, press [Esc] or [Spacebar].
2004-08-04
55