- 16/32 Port Modular MatrixTM KVM Switch User Manual

Firmware Upgrade Recovery

If the firmware upgrade procedure is unnaturally aborted (due to a power

outage, for example), the switch that was being upgraded at the time may

become inoperable, and may be incapable of accepting a normal firmware

upgrade.

If this occurs, to recover, do the following:

1. Slide the unit’s Firmware Upgrade Recovery Switch (see p. 6), to the

RECOVER position.

2. Perform a warm reset (see p. 6).

The switch is now ready to be upgraded.

3. Slide the Recovery Switch back to the NORMAL position.

4. Start the firmware upgrade procedure (see p. 63).

2004-08-04