- km02432.book

Chapter 1. Introduction
9
1. Power Socket
The power cord to the AC source plugs in here.
2. Power Switch
This is a standard rocker switch that powers the station on and off.
3. User Ports
The Cat 5 cables from the console modules plug in here.
4. Firmware Upgrade Port
The Cat 5 cable that transfers the firmware upgrade data from the
administrator's computer to the KM0216 / KM0432 plugs into this RJ-45
connector (see page 57).
5. Daisy Chain Ports
When daisy chaining stations (see page 19), the daisy chain cables plug in
here.
The upper port is the Chain In port; the lower one is the Chain Out port.
The Chain In port is not used on the Master (First Stage) unit.
6. KVM Ports (CPU Ports)
The Cat 5 cables that link the KVM adapter cables to the KM0216 /
KM0432 plug in here.
km02432.book Page 9 Friday, July 20, 2007 3:12 PM