User Guide

Chapter 5. OSD Operation
109
F3: SET
This function allows the user to change the account password and set up a
unique working environment. A separate profile for each user is stored by the
OSD and is activated according to the username that is provided during login.
The settings are explained in the following table:
(continues on next page)
Setting Function
CHANGE
PASSWORD
Enables the user to change the account password.
Enter the old account password in the top field. Enter a new password
in the middle field, and then reenter the password in the bottom field to
confirm it. Press enter to save changes and return to the previous
menu.
OSD
ACTIVATION
Selects which Hotkey activates the OSD function:
[Scroll Lock] [Scroll Lock] or [Ctrl] [Ctrl].
Since the Ctrl key combination may conflict with programs running on
the computers, the default is the Scroll Lock combination.
SET
LOGOUT
TIMEOUT
If there is no input from the KVM console for the amount of time set with
this function, the operator is automatically logged out. A login is
necessary before the KVM console can be used again.
This enables other operators to gain access to the computers when the
original operator is no longer accessing them, but has forgotten to
logout. To set the timeout value, key in a number from 1–180 minutes,
then press [Enter]. If the number is 0 [zero], this function is disabled.
The default is 0 (disabled).
SCREEN
BLANKER
If there is no input from the KVM console for the amount of time set with
this function, the screen is blanked. Key in a value from 1–30 minutes,
then press [Enter]. A setting of 0 disables this function. The default is 0
(disabled).
HOTKEY
COMMAND
MODE
Enables / Disables the Hotkey Command function in case a conflict
with programs running on the computers occurs. The default is
enabled. Choices are Y (Yes), or N (No).