eco PDU PE Series PE7214 / PE7216 / PE7324 / PE7328 / PE8121kJ / PE8216 / PE8316G / PE8324 / PE8324A / PE8324JA / PE9216 / PE9222 / PE9324 / PE9330 Power Distribution Unit User Manual www.aten.
eco PDU PE Series User Manual FCC, CE Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
eco PDU PE Series User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.
eco PDU PE Series User Manual Package Contents The eco PDU PE Series package consists of: 1 PE7214, PE7216, PE7324, PE7328, PE8121kJ, PE8216, PE8316G, PE8324, PE8324A, PE8324JA, PE9216, PE9222, PE9324, or PE9330 Power Distribution Unit 1 Power Cord (14-port, 16-port, 21-port, and 22-port models only; excluding PE8316G) 1 Mounting Kit 1 CD-ROM 1 User Instructions* Check to make sure that all of the components are present and in good order.
eco PDU PE Series User Manual Contents FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Telephone Support . . . . . . . . . . . .
eco PDU PE Series User Manual PDU Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Installation Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Securing the Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Securing the Sensors . . . . . . . . . . . . . . . . . . . . . .
eco PDU PE Series User Manual Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Login Failures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Working Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Account Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Login String / IP Filter / Mac Filter . . . . . . . . . . . . . . . .
eco PDU PE Series User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. [] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps.
eco PDU PE Series User Manual Product Information For information about all NRGence products and how they can help you save money in the data center, visit NRGence on the Web or contact an ATEN Authorized Reseller. Visit ATEN on the Web for a list of locations and telephone numbers International – http://www.aten.com North America – http://www.aten-usa.
Chapter 1 Introduction Overview As part of its NRGence line, ATEN has developed a new generation of green energy power distribution units (eco PDUs) to effectively increase the efficiency of data center power usage. The NRGence PE7214 / PE7216 / PE7324 / PE7328 / PE8121kJ / PE8216 / PE8316G / PE8324 / PE8324A / PE8324JA / PE9216 / PE9222 / PE9324 / PE9330 eco PDUs are intelligent PDUs that contain 14, 16, 21, 22, 24, 28, or 30 AC outlets and are available in various IEC socket configurations.
Chapter 1. Introduction and user-friendly Graphical User Interface that allows you to configure a PDU device and monitor power status of the equipment connected to it. With its advanced security features and ease of operation, the eco PDU is the most convenient, most reliable, and most cost effective way to remotely manage power access for multiple computer installations and allocate power resources in the most efficient way possible. Note: 1. Sensors are optional accessories.
eco PDU PE Series User Manual Comparison Chart Model Inlet / Cord PE7214B NEMA 6-20P (208V) PE7214G Outlets 14 12 x IEC320 C13 + 2 x IEC320 C19 IEC 60320 C20 14 12 x IEC320 C13 + 2 x IEC320 C19 PE7216B NEMA 6-20P 16 PE8216B 14 x IEC 320 C13 + 2 x IEC 320 C19 Metering Level PDU / No 1 x Bank / Outlet PDU / No 1 x Bank / Outlet PDU / No 1 x Bank / Yes 16/16 Outlet PE9216B PE7216G Outlet Switching Yes 8/16 IEC 60320 C20 No PE8216G Yes 16/16 PE9216G Yes 8/16 PE8316G IEC 60309 32A 16
Chapter 1. Introduction Model Inlet / Cord PE7328B / J NEMA L6-30P PE7328G IEC 60309 32A Metering Level Outlet Switching 28 24 x IEC 60320 C13 + PDU / 2 x 4 x IEC 60320 C19 Bank / Outlet No 30 26 x IEC 60320 C13 + PDU / 2 x 4 x IEC 60320 C19 Bank / Outlet Yes 16/30 IEC 60309 32A PE9330B / J NEMA L6-30P PE9330G Outlets Note: For the complete specifications of individual models, including bankby-bank outlet details, please reference Specifications, page 83.
eco PDU PE Series User Manual Features Power Distribution Space saving 0U rack mount design with rear mounting Various IEC outlet models 2 digit 7-segment front panel LED shows PDU/Phase / Bank / Outlet ID 3 digit 7-segment front panel LED shows Current / Voltage / Power Dissipation, IP address, and readings from up to 4 environment sensors Safe shutdown support Separate power for the unit's own power and its power outlets – the user interface is still accessible even when an overload condition
Chapter 1.
eco PDU PE Series User Manual eco Sensors Energy Management Software* Automatic discovery of all PE devices within the same intranet Remote real-time power measurement and monitoring Real-time environment sensor monitoring Plotting/monitoring of all PE devices Exceed threshold alert through SMTP and System log Power Analysis report Note: eco Sensors is designed to work with NRGence PDUs, and is bundled with all PE series packages.
Chapter 1. Introduction Requirements Browsers accessing the eco PDU unit must support SSL 128 bit encryption. For cold booting of attached computers, the computer's BIOS must support Wake on LAN or System after AC Back. For Safe Shutdown: The computer must be running Windows (Windows 2000 or higher) or Linux. The Safe Shutdown program (available by download from our website or on the software CD included), must be installed and running on the computer.
eco PDU PE Series User Manual Optional Accessories Environment Sensors For complete energy management of an instrumented data center with the use of the eco PDU and eco Sensors software, you should install 4 sensors for each of the racks in your data center in order to generate a complete energy-efficient data chart. Higher sensor installation density is helpful to generate more accurate data. 8/16-port models have 4 sensor ports.
Chapter 1. Introduction Cable Holders Cable holders are optional accessories. For added safety, use ATEN Lok-UPlug cable holders to secure the cables from your attached devices in place on the eco PDU unit. Use only the ATEN Lok-U-Plug cable holders that have been specifically designed to work with the eco PDU. Using any other kind of cable securing device could be highly dangerous.
eco PDU PE Series User Manual Components PE7214B / PE7214G 2 5 1 3 4 11
Chapter 1. Introduction No. Item Description 1 Power Outlets* 14 in total (12 x IEC320 C13 + 2 x IEC320 C19) Bank 1-1: Outlet 1–14; 12 x C13 + 2 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Environmental Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE7216 / PE8216 / PE9216 PE8216 PE7216 1 PE9216 5 2 1 5 5 3 4 Note: The PE7216 / PE8216 / PE9216 unit components are identical except for the outlet LEDs – the PE7216 has none; the PE8216 has 16; and the PE9216 has 8, as shown by number 9 above.
Chapter 1. Introduction No. Item Description 1 Power Outlets* 16 in total (14 x IEC 320 C13 + 2 x IEC 320 C19) Bank 1-1: Outlet 1–8: 7 C13; 1 x C19 Bank 1-2: Outlet 9–16: 7 x C13; 1 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Environmental Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE8316G 1 5 2 1 3 4 15 5
Chapter 1. Introduction No. Item Description 1 Power Outlets* Total : 6 x IEC320 C13 + 10 x IEC320 C19 Bank 1: Outlet 1–8; 3 x C13 + 5 x C19 Bank 2: Outlet 9–16; 3 x C13 + 5 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Environmental Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE8121kJ 1 5 1 5 2 1 3 4 17 5
Chapter 1. Introduction No. Item Description 1 Power Outlets* 21 in total (21 x IEC 320 C13) Bank 1-1: Outlet 1–7 Bank 1-2: Outlet 8–14 Bank 1-3: Outlet 15-21 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE9222B / PE9222G 6 1 2 1 3 4 19 5
Chapter 1. Introduction No. Item Description 1 Power Outlets* 22 in total (19 x IEC320 C13 + 3 x IEC320 C19) Bank 1-1: Outlet 1–14; 12 x C13 + 2 x C19 Bank 1-2: Outlet 15–22; 7 x C13 + 1 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE7324 / PE8324 / PE9324 PE8324 PE7324 PE9324 1 5 1 5 5 5 5 2 1 3 4 Note: The PE7324 / PE8324 / PE9324 unit components are identical except for the outlet LEDs – the PE7324 has none; the PE8324 has 24; and the PE9324 has 16, as shown by number 5 above.
Chapter 1. Introduction No. Item Description 1 Power Outlets* 24 in total (21 x IEC 320 C13 + 3 x IEC 320 C19) Bank 1-1: Outlet 1–8: 7 C13; 1 x C19 Bank 1-2: Outlet 9–16: 7 x C13; 1 x C19 Bank 2: Outlet 17–24: 7 x C13; 1 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE8324A / PE8324JA 5 1 5 1 2 5 3 4 23 1
Chapter 1. Introduction No. Item Description 1 Power Outlets* 24 in total (24 x NEMA 5-15R) Bank 1-1: Outlet 1–8 Bank 1-2: Outlet 9–16 Bank 2: Outlet 17-24 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23. 3 Circuit Breakers As a safety measure, if there is an overcurrent situation regarding the device’s power, the circuit breakers will trip.
eco PDU PE Series User Manual PE7328 5 1 2 5 1 3 4 25
Chapter 1. Introduction No. Item Description 1 Power Outlets* 28 in total (24 x IEC 320 C13 + 4 x IEC 320 C19) Bank 1: Outlet 1–14: 12 C13; 2 x C19 Bank 2: Outlet 15–28: 12 x C13; 2 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Environmental Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual PE9330 5 1 6 2 1 3 4 27 6
Chapter 1. Introduction No. Item Description 1 Power Outlets* 30 in total (26 x IEC 320 C13 + 4x IEC 320 C19) Bank 1-1: Outlet 1–14: 7 C13; 1 x C19 Bank 1-2: Outlet 15–22: 7 x C13; 1 x C19 Bank 2: Outlet 23–30: 7 x C13 + 1 x C19 2 Port and LED Panel The Port and LED panel contains: Readout Section and LEDs Environmental Sensor Ports LAN Port Door Sensor Port Reset Switch Full details of this section are provided on page 23.
eco PDU PE Series User Manual Port and LED Panel (All models) 1 2 3 4 6 5 No. 1 Item ID Section 7 Description The ID of the selected PDU/Phase / Bank / Outlet appears in the LED display window. When PDU/Phase LED is lit, the LED display window will show P1.
Chapter 1. Introduction No. Item Description 4 Sensor Ports External sensors plug into these four RJ-11 ports. See Environment Sensors, page 9, and Securing the Sensors, page 36, for further information. 5 Reset Switch This switch is recessed and must be pushed with a thin object, such as the end of a paper clip. Press and release to reboot the device.
Chapter 2 Hardware Setup Before You Begin 1. Important safety information regarding the placement of this device is provided on page 76. Please review it before proceeding. 2. Make sure that power to all the devices you will be connecting have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. 3. See Resetting the Circuit Breaker, page 79 for important information about resetting a tripped circuit breaker.
Chapter 2. Hardware Setup PDU Placement For safety reasons the eco PDU should not be installed with the power sockets facing directly up or down, and thus should only be installed with the power sockets facing out from a vertical position as shown below: Right. Floor Wrong Floor Note: The eco PDU models shown in the diagrams are for rack mount reference purposes only.
eco PDU PE Series User Manual Installation To set up your installation, refer to the installation diagram on the next page (the numbers in the diagram correspond to the numbered steps), and do the following: 1. Ensure that the eco PDU unit is properly grounded. Note: Do not omit this step. Proper grounding helps to prevent damage to the unit from surges of static or electricity. 2.
Chapter 2.
eco PDU PE Series User Manual Securing the Cables For added safety, use ATEN Lok-U-Plug cable holders to secure the cables from your attached devices in place on the eco PDU unit. Secure the cable holders using the specially designed holes around the individual power outlets, as shown below: Note: 1. Cable holders are an optional accessory. See Cable Holders, page 10. 2. Use only the ATEN Lok-U-Plug cable holders that have been specifically designed to work with the eco PDU.
Chapter 2. Hardware Setup Securing the Sensors Connect the sensors to the eco PDU’s front panel sensor ports and secure them using sensor mounts, tie wraps, and adhesive cable tie holders. If you use a tie wrap to secure the sensor, tighten the tie wrap over the recessed channel on the sensor, as shown in the following diagram: Note: 1. The sensors shown in the above diagram are for reference purposes only. The sensors for the eco PDU may look slightly different. 2.
Chapter 3 Basic Operation and First Time Setup Operation Methods NRGence eco PDU models provide three methods to access and manage your installation: Browser, eco Sensors (eco PDU Management Software), and SNMP. Note: The following sections of this chapter contain information concerning Browser operation. For eco Sensors operation, please reference the separate eco Sensors User Manual. The eco Sensors software and User Manual can be downloaded from the ATEN website.
Chapter 3. Basic Operation and First Time Setup First Time Setup Once the eco PDU installation has been cabled up, the next task the Administrator needs to perform involve configuring the network parameters, changing the default Administrator login settings, and adding users. The easiest way to accomplish this is to log in over the Net with a browser. Note: 1. Since this is the first time you are logging in, use the default Username: administrator; and the default Password: password.
eco PDU PE Series User Manual Network Configuration To set up the network, do the following: 1. Click the Setup tab. 2. This opens on the Device Configuration page. A screen similar to the one below appears: 3. Fill in the fields according to the information provided under Device Configuration, page 55.
Chapter 3. Basic Operation and First Time Setup Changing the Administrator Login To change the default Administrator username and password, do the following: 1. Click the User tab. Once users have been added to the system, the Accounts page displays a detailed list of users – with more information about them – in the large central panel: 2. In the Administrator Information section at the top, reset the name and password fields to something unique, then click Save (at the bottom of the page.
Chapter 4 Logging In Logging In The eco PDU can be accessed via a supported Internet browser from any platform. Note: Browsers must support SSL 128 bit encryption. To access the eco PDU do the following: 1. Open your browser and specify the IP address of the eco PDU you want to access in the browser's URL location bar. Note: You can get the IP address from the eco PDU administrator, or see IP Address Determination, page 81, for information about setting it up yourself. 2.
Chapter 4. Logging In The eco PDU Main Page After you have successfully logged in, the eco PDU Main Page comes up with the Energy Connections page displayed: Note: The screen depicts an Administrator’s page. Depending on a user’s type and permissions, and your PE model, not all of these elements appear.
eco PDU PE Series User Manual Page Components The web page screen components are described in the table, below: No. Item Description 1 Tab Bar The tab bar contains the eco PDU’s main operation categories. The items that appear in the tab bar are determined by the user’s type, and the authorization options that were selected when the user’s account was created. 2 Menu Bar The menu bar contains operational sub-categories that pertain to the item selected in the tab bar.
Chapter 5 Energy Energy Connections When you log in to the eco PDU, the interface opens with its default selection of the Energy tab; and the Connections menu. The contents of the PDU Status, Bank Status, and Outlet Status sections are displayed in the main panel. Note: Only enabled eco PDU models will display the Bank Status and/or Outlet Status submenu section.
eco PDU PE Series User Manual PDU Status All eco PDU models support PDU device level monitoring. The PDU Status section allows you to set up a power management configuration for the PDU device as a whole: PDU Threshold Settings These fields are used to set the maximum, minimum, and fluctuation threshold settings for Aggregate Current, Voltage, Power, and Aggregate Power Dissipation. If a range falls below the minimum setting, or exceeds the maximum setting an alarm is triggered.
Chapter 5. Energy Bank Status All eco PDU models support Bank level monitoring. The Bank Status section allows you to set up a power management configuration for the individual banks: Threshold Settings These fields are used to set the maximum, minimum, and fluctuation threshold settings for Aggregate Current, Voltage, Power, and Power Dissipation. If a range falls below the minimum setting, or exceeds the maximum setting an alarm is triggered. Breaker status (ON / OFF) displays here.
eco PDU PE Series User Manual Outlet Status If your eco PDU models supports outlet level power management, threshold settings and manual On/Off/Reboot switching can be performed on this page. Threshold Settings These fields are used to set the maximum, minimum, and fluctuation threshold settings for Aggregate Current, Voltage, Power, and Power Dissipation. If a range falls below the minimum setting, or exceeds the maximum setting an alarm is triggered.
Chapter 5. Energy Configuration The Configuration page is used to configure the settings of the eco PDU at the bank and individual power outlet level: POP Setting This section allows you to configure the settings for NRGence’s exclusive Proactive Overload Protection (POP) technology. Effective on all non-critical outlets, this added safety feature automatically powers off the last outlet that caused the current overload.
eco PDU PE Series User Manual Outlet Configuration This page lets you set up the power management configuration for the selected outlet. The meanings of the field headings are given in the following table : Heading Meaning Outlet Name Each outlet can be given a distinctive name. The maximum number of characters is 15. Confirmation Required If this option is enabled (there is a check in the checkbox), a dialog box comes up asking you to confirm a power operation before it is performed.
Chapter 5. Energy Heading Remote Turn ON Method Meaning Kill the Power: If this option is selected, the eco PFDU waits for the amount time set in the Power Off Delay field, and then turns the Outlet's power Off. Turning the power off performs a cold (non-safe) shutdown. MAC Address In order to use either of the Safe Shutdown and Restart methods the MAC address of the computer connected to the outlet must be filled in here. When you have finished making your configuration settings, click Save.
Chapter 6 User Management Overview When you select the User tab the screen comes up with the Accounts menu, and the Administrator Information and User Information displayed in the main panel: Note: There is a pre-installed administrator account. It can be used to set up the device and to begin creating users and groups. The Username for this account is administrator; the password is password. For security purposes, we strongly recommend changing these to something unique.
Chapter 6. User Management User Information To add a user, do the following: 1. Select the user type in the Management drop-down menu. 2. Key in a name and password in the Name and Password fields. 3. Set the outlet-by-outlet permissions of the user in the Outlet field. 4. Set the Management field to Enable. 5. Click Save to save your settings. Note: Values must be entered in both the Name and Password fields in order to enable an account.
Chapter 7 Log Log The eco PDU keeps a record of transactions that take place on its installation, and stores up to 128 events at one time.
Chapter 7. Log The System Log Event List Clicking on a device in the Sidebar displays its log events in the main panel’s log event list. Clicking the Refresh button brings the log list up to date with the latest events. The entry box to the right of the Refresh button lets you set the number of events to display per page. Simply key in the number of your choice. The top right of the main panel shows the total number of pages in the log file, and what page you are currently viewing.
Chapter 8 Setup Device Management The Setup page allows administrators and users with device management permission to configure and control overall eco PDU operations. Device Configuration This page presents information about the selected device, as described in the following sections: General Item Meaning PDU Name This field lets you give the device a unique name. Simply delete whatever is in the text box and key in the name of your choice.
Chapter 8. Setup Service Ports As a security measure, if a firewall is being used, the Administrator can specify the port numbers that the firewall will allow. If a port other than the default is used, users must specify the port number as part of the IP address when they log in. If an invalid port number (or no port number) is specified, the eco PDU will not be found.
eco PDU PE Series User Manual IPv4 Configuration The PDU’s IPv4 IP and DNS addresses (the traditional method of specifying IP addresses) can either be assigned dynamically (DHCP), or a fixed IP address can be specified. For dynamic IP address assignment, select the Obtain IP address automatically radio button. (This is the default setting.) To specify a fixed IP address, select the Set IP address manually radio button and fill in the IP address with values appropriate for your network.
Chapter 8. Setup IPv6 Configuration IPv6 is the new (128-bit) format for specifying IP addresses. The PDU’s IPv6 IP and DNS addresses can either be assigned dynamically (DHCP), or a fixed IP address can be specified. For dynamic IP address assignment, select the Obtain IP address automatically radio button. (This is the default setting.) To specify a fixed IP address, select the Set IP address manually radio button and fill in the IP address with values appropriate for your network.
eco PDU PE Series User Manual Event Notification The Event Notification section is divided into three sections: SMTP Settings; SNMP Trap Receivers; and Syslog Server. Each section is described below. Note: SMTP communications are supported on Port 25. SMTP Settings To have the eco PDU device email reports from the SMTP server to you, do the following: 1. Enable the Enable report from the following SMTP server, and key in the IP address of your SMTP server. 2.
Chapter 8. Setup SNMP Trap Receivers Up to four SNMP management stations can be specified. If you want to use SNMP trap notifications, do the following: 1. Check Enable SNMP Trap. 2. Select which version of SNMP you want to use. 3. Key in the IP address(es) and the service port number(s) of the computer(s) to be notified of SNMP trap events. The valid port range is 1–65535. The default port number is 162.
eco PDU PE Series User Manual Syslog Server To record all the events that take place on eco PDU devices and write them to the eco PDU Syslog server, do the following: 1. Check Enable Syslog Server. 2. Key in the IP address and the port number of the Syslog server. The valid port range is 1-65535. The default port number is 514.
Chapter 8. Setup Date/Time The Date/Time dialog page sets the eco PDU time parameters: Set the parameters according to the information described below. Time Zone To establish the time zone that the eco PDU is located in, drop down the Time Zone list and choose the city that most closely corresponds to where it is at. If your country or region employs Daylight Saving Time (Summer Time), check the corresponding checkbox.
eco PDU PE Series User Manual Manual Input Use this section to specify the eco PDU’s date and time manually. Click the calendar icon and click the calendar entry for the date. Key the time into the Time field, using the HH:MM:SS (hours, minutes, seconds) format. Note: This section is only enabled when auto adjustment (in the Network Time section) is disabled (the checkbox is unchecked).
Chapter 8. Setup Security The Security page controls access to the eco PDU. Login Failures Allowed sets the number of consecutive failed login attempts that are permitted from a remote user. Timeout sets the amount of time a remote user must wait before attempting to login again after exceeding the number of allowed failures. Working Mode If ICMP is enabled, the eco PDU device can be pinged. If it is not enabled, the device cannot be pinged. The default is Enabled.
eco PDU PE Series User Manual Account Policy The Account Policy section governs policies in regard to usernames and passwords. Check a policy and enter the required information in the appropriate fields.= Item Description Minimum Username Length Sets the minimum number of characters required for a username. Acceptable values are from 1–16. Minimum Password Length Sets the minimum number of characters required for a password. Acceptable values are from 1–16.
Chapter 8. Setup Login String / IP Filter / Mac Filter Login String The Login String entry field is used to specify a login string (in addition to the IP address) that users must include when accessing the eco PDU device with a browser. For example: 192.168.0.126/abcdefg The following characters are allowed: 0–9 a–z A–Z ~ ! @ $ * ( ) _ ‘ , The following characters are not allowed: & ^ { } ‘ ’ < > | " % ” : / ? # \ [Space] + - = [ ] ; Compound characters (É Ç ñ ... etc.) Note: 1.
eco PDU PE Series User Manual IP Filter / MAC Filter If any filters have been configured, they appear in the IP Filter and/or MAC Filter list boxes. IP and MAC Filters control access to the eco PDU based on the IP and/or MAC addresses of the client computers attempting to connect. A maximum of 5 IP filters and 5 MAC filters are allowed. To enable IP and/or MAC filtering, click to put a check mark in the IP Filter Enable and/or MAC Filter Enable checkbox.
Chapter 8. Setup 3. To filter a single IP address, key in the same address as the start IP. To filter a continuous range of addresses, key in the end number of the range (for example, 192.168.0.225). 4. After filling in the address, click OK. Repeat these steps for any additional IP addresses you want to filter. To add a MAC filter, do the following: 1. Click Add. A dialog box similar to the one below appears: 2. Specify the MAC address in the dialog box (for example, 001074670000), then click OK.
eco PDU PE Series User Manual Authentication & Authorization The Authentication & Authorization page is used to set up login authentication and authorization management from external sources.
Chapter 8. Setup RADIUS Settings To allow authentication and authorization for the eco PDU device through a RADIUS server, do the following: 1. Check Enable. 2. Fill in the IP addresses and service port numbers for the Preferred and Alternate RADIUS servers. The default port number for the Preferred server is 1812; the default port number for the Alternate server is 1645. Note: Make sure that the port numbers you specify here match the port numbers used by the RADIUS servers. 3.
eco PDU PE Series User Manual Private Certificate When logging in over a secure (SSL) connection, a signed certificate is used to verify that the user is logging in to the intended site. For enhanced security, the Private Certificate section allows you to use your own private encryption key and signed certificate, rather than the default ATEN certificate.
Chapter 9 PDU PDU The PDU function is used to upgrade the eco PDU’s firmware, and to backup and restore the device’s configuration settings.
eco PDU PE Series User Manual A description of the items shown in this panel are given in the table, below: Item Description Check Main Firmware Version If you enable Check Main Firmware Version, the eco PDU’s current firmware level is compared with that of the upgrade file. If the current version is equal to or higher than the upgrade version, a popup message appears, to inform you of the situation and stops the upgrade procedure. Name Lists all of the eco PDU devices.
Chapter 9. PDU Upgrading the Firmware To upgrade the firmware refer to the screenshot on the preceding page, and do the following: 1. Go to our website and download the new firmware file to a convenient location on your computer. 2. Click the Browse button; navigate to where the firmware file is located and select it. 3. Click Upgrade to start the upgrade procedure. If you enabled Check Main Firmware Version the current firmware level is compared with that of the upgrade file.
eco PDU PE Series User Manual Backup To backup the device’s settings do the following: 1. In the Password field, key in a password for the file. Note: Entering a password is optional. If you do enter a password, make a note of it, since you will need it to be able to restore the file. 2. Click Save. 3. When the browser asks what you want to do with the file, select Save to disk; then save it in a convenient location. Restore To restore a previous backup, do the following: 1.
Appendix Safety Instructions General This product is for indoor use only. Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers.
eco PDU PE Series User Manual Do not allow anything to rest on the power cord or cables. Route the power cord and cables so that they cannot be stepped on or tripped over. To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). Position system cables and power cables carefully; Be sure that nothing rests on any cables.
Appendix Rack Mounting Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack. Always load the rack from the bottom up, and load the heaviest item in the rack first. Make sure that the rack is level and stable before extending a device from the rack.
eco PDU PE Series User Manual Resetting the Circuit Breaker Before switching the circuit breaker to reset a trip, power down and disconnect all devices connected to the eco PDU's power outlets to prevent damage caused by a sudden power surge. If a power surge causes the eco PDU’s circuit breaker to switch off the power and it needs to be reset, follow the instructions below. Recovery Procedure: 1. Safely power down and disconnect all devices connected to the eco PDU's power outlets. 2.
Appendix Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com For telephone support, see Telephone Support, page iii North America Email Support Online Technical Support support@aten-usa.com Troubleshooting Documentation Software Updates Telephone Support http://www.aten-usa.
eco PDU PE Series User Manual IP Address Determination If you are an administrator logging in for the first time, you need to access the eco PDU in order to give it an IP address that users can connect to. There are two methods to choose from. In each case, your client computer must be on the same network segment as the eco PDU. After you have connected and logged in you can give the device its fixed network address. (See Device Management, page 49.
Appendix (Continued from previous page.) 3. Select the device in the Device List. Note: 1. If the list is empty, or your device doesn't appear, click Enumerate to refresh the Device List. 2. If there is more than one device in the list, use the MAC address to pick the one you want. The eco PDU's MAC address is located on its bottom panel. 4. Select either Obtain an IP address automatically (DHCP), or Specify an IP address.
eco PDU PE Series User Manual Specifications There are 24 models in the PE7xxx / PE8xxx / PE9xxx range. They are available in 14-, 16-, 21-, 22-, 24-, 28-, or 30-port versions, with power inlet/ cord variations. A basic comparison is show in the table, below.
Appendix Model Inlet / Cord PE7328B / J NEMA L6-30P PE7328G IEC 60309 32A Metering Level Outlet Switching 28 24 x IEC 320 C13 + PDU / 2 x No 4 x IEC 320 C19 Bank / Outlet 30 26 x IEC 320 C13 + PDU / 2 x Yes 16/30 4 x IEC 320 C19 Bank / Outlet IEC 60309 32A PE9330B / J NEMA L6-30P PE9330G Outlets Note: The J models are identical to their B model counterparts but have power cords designed for the Japanese market.
eco PDU PE Series User Manual PE7214B / PE7214G Function Power Outlets PE7214B Connectors 14 Power Cord Power Outlets 1 x NEMA 6-20P (208V) IEC Environment Sensors Door Sensor 4 x RJ-11 Female (Black) 1 x RJ-45 Female (Silver) + LEDs (Orange/Green) Outlet Status NA PDU / Bank / Outlet 2-digit 7-segment (Orange) PDU / Bank / Outlet 3 (Green) Current / Volt / Power / Sensor1–Sensor4 / FW Upgrade 3-digit 7-segment (Orange) Current / Volt / Power / Sensor1–Sensor4 7 (Green) Door Open 1 (Red)
Appendix PE7216B / PE8216B / PE9216B Function PE7216B Power Outlets Direct Connectors Power Inlet Power Outlets 1 x NEMA 6-20P NEMA IEC NA Total: 14 x IEC 320 C13 + 2 x IEC 320 C19 Bank 1-1, Outlet 1–8: 7 x C13 + 1 x C19.
eco PDU PE Series User Manual PE7216G / PE8216G / PE9216G Function PE7216G Power Outlets Direct Connectors Power Inlet Power Outlets 1 x IEC 320 C20 NEMA IEC NA Total: 14 x IEC 320 C13 + 2 x IEC 320 C19 Bank 1-1, Outlet 1–8: 7 x C13 + 1 x C19.
Appendix PE8316G Function PE8316G Power Outlets Direct Connectors Power Cord Power Outlets 16 IEC Environment Sensors Door Sensor LAN LEDs Outlet Status 1 x 4-pin Dry Contact 16 (Orange) 2-digit 7-segment (Orange) 3 (Green) Current / Volt / P.D. / Sensor1–Sensor4 / FW Upgrade 3-digit 7-segment (Orange) Current / Volt / P.D.
eco PDU PE Series User Manual PE8121kJ Function PE8121kJ Power Outlets Direct Connectors Power Inlet Power Outlets 21 IEC Environment Sensors Door Sensor LAN LEDs Outlet Status 21 (Orange) 2-digit 7-segment (Orange) 3 (Green) 3-digit 7-segment (Orange) 1 (Green) Power Switches 7 (Green) 1 (Red) IP 1 (Blue) LED Display Select 1 x Pushbutton PDU / Bank / Outlet Select 2 x Pushbutton Reset 1 x Semi-recessed Pushbutton Power 1 x 16A Pushbutton Breaker Nominal Input Power 100–240V~; 50–6
Appendix PE9222B / PE9222G Function Power Outlets Direct Connectors Power Cord Power Outlets PE9222B 1 x NEMA 6-20P (208V) IEC Environment Sensors Door Sensor 4 x RJ-11 Female (Black) 1 x RJ-45 Female (Silver) + LEDs (Orange/Green) Outlet Status 8 (Orange) PDU / Bank / Outlet 2-digit 7-segment (Orange) PDU / Bank / Outlet 3 (Green) Current / Volt / Power / Sensor1–Sensor4 / FW Upgrade 3-digit 7-segment (Orange) Current / Volt / Power / Sensor1–Sensor4 7 (Green) Door Open 1 (Red) IP 1 (G
eco PDU PE Series User Manual PE7324B/J / PE8324B/J / PE9324B/J Function Power Outlets PE7324B / J Direct Connectors IEC 1 x NEMA L6-30P Total: 21 x IEC 320 C13 + 3 x IEC 320 C19 Bank 1-1, Outlet 1–8: 7 x C13 + 1 x C19.
Appendix PE8324A / PE8324JA Function Power Outlets PE8324A Connectors 24 Power Cord Power Outlets 1 x NEMA L5-30P (UL) IEC Environment Sensors Door Sensor Outlet Status 24 (Orange) 2 (Green) Current / Volt / P.D.
eco PDU PE Series User Manual PE7324G / PE8324G / PE9324G Function Power Outlets PE7324G Direct Connectors IEC 1 x IEC 309 32A Total: 21 x IEC 320 C13 + 3 x IEC 320 C19 Bank 1-1, Outlet 1–8: 7 x C13 + 1 x C19.
Appendix PE7328B/J / PE7328G Function Power Outlets PE7328B / J Connectors 28 Power Cord Power Outlets 1 x NEMA L6-30P IEC Environment Sensors Door Sensor 4 x RJ-11 Female (Black) 1 x RJ-45 Female (Silver) + LEDs (Orange/Green) Outlet Status NA PDU / Bank / Outlet 2-digit 7-segment (Orange) PDU / Bank / Outlet 3 (Green) Current / Volt / P.D. / Sensor1–Sensor4 / FW Upgrade 3-digit 7-segment (Orange) Current / Volt / P.D.
eco PDU PE Series User Manual PE9330B/J / PE9330G Function Power Outlets PE9330B / J Connectors 30 Power Cord Power Outlets 1 x NEMA L6-30P IEC Environment Sensors Door Sensor 4 x RJ-11 Female (Black) 1 x RJ-45 Female (Silver) + LEDs (Orange/Green) Outlet Status 16 (Orange) PDU / Bank / Outlet 2-digit 7-segment (Orange) PDU / Bank / Outlet 3 (Green) Current / Volt / P.D. / Sensor1–Sensor4 / FW Upgrade 3-digit 7-segment (Orange) Current / Volt / P.D.
Appendix Administrator Login Failure If you are unable to perform an Administrator login (because the Username and Password information has become corrupted, or you have forgotten it, for example), you can clear the login information with the following procedure: 1. Power off the eco PDU and remove its housing. 2. Short the jumper labeled J1 (PIN5 and PIN6). J1 3. Power on the eco PDU. 4. After the beep indicates successfully powered on, power off the switch. 5. Remove the jumper cap from J1. 6.
eco PDU PE Series User Manual Limited Warranty ATEN warrants this product against defects in material or workmanship for a period of one (1) year from the date of purchase. If this product proves to be defective, contact ATEN's support department for repair or replacement of your unit. ATEN will not issue a refund. Return requests can not be processed without the original proof of purchase.
