User manual

1. Introduction

System Requirements

Consoles

 A VGA, SVGA, or Multisync monitor capable of the highest resolution

that you will be using on any computer in the installation

 A PS/2 keyboard

 A PS/2 mouse

 Stereo microphone and stereo speakers (optional)

Note: If you connect a DDC type monitor to the Local unit, the monitor that

connects to the Remote unit must be able to support the highest video

resolution that the DDC monitor can provide.

Computers

The following equipment must be installed on each computer that is to be

connected to the system:

 A VGA, SVGA or Multisync card

 A 6-pin mini-DIN mouse port

 A 6-pin mini-DIN keyboard port

Cables

 Although it is possible to use standard KVM cables to link computers with

PS/2 type keyboard and mouse ports to the CE-300L, for optimum signal

integrity and to simplify the layout, we strongly recommend that you use

the high quality custom KVM cable sets provided with this package.

 It is not possible to use standard KVM cables to link computers with AT

type keyboard and mouse ports to the CE-300L. For those computers,

custom KVM cable sets must be used. Contact your dealer for details.

 Category 5 cable is the minimum required to connect the local and remote

CE-300 units. Cable of a lesser standard will result in degraded video

signals. For best performance, we strongly recommend Category 5 cable.