HDMI to VGA Converter with Scaler VC812 User Manual www.aten.
VC812 User Manual EMC Information FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
VC812 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://eservice.aten.
VC812 User Manual Package Contents The VC812 HDMI to VGA Converter with Scaler package consists of: 1 VC812 HDMI to VGA Converter with Scaler 1 Software CD 1 Power Adapter 1 User Instructions* Check to make sure that all the components are present and that nothing got damaged in shipping. If you encounter a problem, contact your dealer.
VC812 User Manual Contents FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii User Notice . . . . . . . . . . . . . . . . . . . . . . . . .
VC812 User Manual 3. Operation Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 On-Screen Display (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Output Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Output Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Default Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . .
VC812 User Manual About this Manual This User Manual is provided to help you get the most from your VC812 system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Introduction, introduces you to the VC812 system. Its purpose, features and benefits are presented, and its front and back panel components are described. Hardware Setup, describes how to set up your VC812 installation. The necessary steps are provided.
VC812 User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. [] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps.
Chapter 1 Introduction Overview The VC812 HDMI to VGA converter with Scaler offers an easy and convenient way of converting HDMI input signals into analog video (VGA). The VC812 enables you to use a non-HDMI display to access HDMI content. It supports input resolutions 480p, 720p, 1080p, 1080i, and up to 1900 x 1200 PC input resolution. It has both analog and digital audio outputs, as well as one stereo audio output.
VC812 User Manual Features Converts HDMI signals to VGA output Supports analog/stereo audio Superior video quality – up to 1080p; 1920 x 1200 Scaler – a premium scaling engine that converts various video input resolutions into the display's native resolution, while adjusting the picture ratio automatically for maximum viewing comfort.
1. Introduction Requirements The following equipment is required for a complete VC812 installation: Source Devices(s) The source device should have the following: HDMI Type A connector PC or laptop with Mini USB port (for configuration via VC812 Utility Tool) Display Device VGA based video device with HDB HDB-15 male connector Cables HDMI Type A cable HDB-15 cable (for VGA based video display device) RCA audio cable (for Coaxial audio device) 3.
VC812 User Manual Components Front View 1 No. 1 Component F/W Upgrade switch 2 3 4 5 Description Set this to Off to operate the VC812 in Normal Mode. Note: In case the firmware needs to be upgraded, turn the switch On to have the VC812 enter Firmware Upgrade mode. Contact your product dealer for more details. 2 LED Status The Power LED lights red to indicate that the VC812 is receiving power. The Signal LED lights green to indicate that an HDMI input source is active.
1. Introduction Rear View 1 No. 2 3 Component 4 5 6 Description 1 Power Jack Plug in the provided power adapter to this power jack to power on the VC812. 2 Firmware Upgrade Port For device configuration via the utility tool, connect this port to a PC or laptop using a USB to mini USB cable. 3 Stereo Audio Port Connect your analog stereo audio device to this port. 4 Digital Audio Port Connect the coaxial audio cable of your audio device to this port.
VC812 User Manual This Page Intentionally Left Blank 6
Chapter 2 Hardware Setup 1. Important safety information regarding the placement of this device is provided on page 21. Please review it before proceeding. 2. Make sure that the power to all devices connected to the installation are turned off. 3. Make sure that all devices you will be installing are properly grounded. Mounting For convenience and flexibility, the VC812 can be mounted on the wall or a rack. To mount a unit, screw the built-in brackets into any convenient location on the wall or a rack.
VC812 User Manual Installation Installation of the VC812 is simply a matter of plugging in the appropriate cables. To install the VC812, refer to the installation diagram as you perform the following steps: 1. Use an HDMI cable to connect the HDMI output port on the video source device to the HDMI In port on the VC812. 2. Use an HDB-15 cable to connect the VGA display device to the VGA Out port on the VC812. 3.
Chapter 3 Operation Overview The VC812 HDMI to VGA converter with Scaler offers easy and flexible operation through its built-in On-Screen Display (OSD) and the Utility Tool, which can be installed on a computer connected to the VC812’s mini USB port.
VC812 User Manual Output Setup In the OSD Menu screen, highlight 1. Output Setup and press the Menu pushbutton to open the Output Setup submenu, as follows: Select the submenu option you want to configure – each option is further discussed in the proceeding sections. Output Resolution You can manually select the screen resolution for the display. Highlight the resolution you want to use and press Menu.
3. Operation Output Mode Select the color space setting for the display. The selection includes RGB and YCbCr422. Default Pattern Select the color component for the display. Available options are as follows: Disable Color W-HRamp White Gray W-VRamp Cross Windows Diagonal Hatch H-Ramp Audio Source Select the EDID audio channel you want the VC812 to use. The selection includes 2ch and 7.1ch. Image In the OSD Menu screen, navigate to 2.
VC812 User Manual B/W extension: Turn the black and white extension On or Off. This is set to Off by default. Color Tone: Select the color tone for the display. Options are Off (default), Skin or Green. Edge Enhance: Select the degree of display image edge enhancements – you can choose: Typ (typical), Mid (middle), Max (maximum) or Off. This is set to Typ by default. Adjustment In the OSD Menu screen, navigate to 3.
3. Operation System In the OSD Menu screen, navigate to 3. Adjustment and press the Menu pushbutton to open the Adjustment submenu, as follows: View the current input resolution and firmware version, as well as reset the VC812 to its factory default settings. Input Res. Info: This shows the current input resolution used by the device. F/W Version: This shows the current firmware version. Factory Reset: Select this if you want to reset the device back to the factory default settings.
VC812 User Manual Utility Tool The VC812 HDMI to VGA converter with Scaler comes with a software CD that contains the VC812 Utility Tool for quick and easy configuration of the device. To manage the VC812 using the utility tool, connect your computer to the installation via the Mini USB port. Insert the software CD into the computer’s optical disk drive, and double-click on the application file contained within to run it. You can also copy this file into your computer’s local drive.
3. Operation You can cycle through the Menu options in the order shown in the table below.
VC812 User Manual Output Setup Select the Output Resolution, Output Mode and Default Pattern that you want the VC812 to use. Output Resolution From the drop down menu, select the screen resolution that you want to use for your display.
3. Operation Output Mode From the drop down menu, select the color space setting for your display. Choices include RGB, YC444 and YC422. Click the Apply button to use the value entered. Default Pattern From the drop down menu, select the color component for your display. Available options are as follows: Disable Window H-Color V-Color H-Ramp V-Ramp H-Gray V-Gray Click the Apply button to use the value entered.
VC812 User Manual For the following options, use the left increase or decrease the value. Setting and right screen buttons to Value Contrast 0-255 (default is 128) Brightness 0-255 (default is 128) Saturation 0-255 (default is 128) Hue 0-255 (default is 128) Sharpness 0-127 (default is 0) B/W extension: Turn the black and white extension On or Off. This is set to Off by default. Color Tone: Select the color tone for the display. Options are Off (default), Skin or Green.
3. Operation picture area either to the left or right (for Input H Adj and Input V Adj) of the screen. Setting Under/Over Scan Value -50% to +50% (default is 0 or off) Input H Adj 0-200 (default is 0) Input V Adj 0-200 (default is 0) Aspect Ratio: Select the aspect ratio for the display. Options are 4:3 (default) or 16:9. For H-Mirror and V-Mirror, select whether the function is On or Off. Click the Apply button(s) to use the values entered.
VC812 User Manual Powering Off and Restarting If you power off the VC812, follows these steps before powering it on again: 1. Power off the attached devices. 2. Unplug the power adapter cable from the VC812. 3. Wait 10 seconds, and then plug the power adapter cable back in. 4. After the VC812 is powered on, power on the attached devices.
Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. This product is for indoor use only. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers.
VC812 User Manual Never push objects of any kind into or through cabinet slots. They may touch dangerous voltage points or short out parts resulting in a risk of fire or electrical shock. Do not attempt to service the device yourself. Refer all servicing to qualified service personnel. If the following conditions occur, unplug the device from the wall outlet and bring it to qualified service personnel for repair. Liquid has been spilled into the device.
Appendix Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://eservice.aten.com For telephone support, see Telephone Support, page iii: North America Email Support Online Technical Support support@aten-usa.com Troubleshooting Documentation Software Updates Telephone Support http://www.aten-usa.
VC812 User Manual Specifications Function Connectors Input VC812 1 x HDMI Type A female HDMI In Output Video Out Digital Coaxial Audio 1 x RCA female (Yellow) Analog Stereo Audio 1 x 3.