User manual

CL-1208 / CL-1216 User Manual
38
F5 SKP
This function enables you to easily skip backward or forward - switching the
KVM focus from the currently active computer port to the previous or next
available one.
 The selection of computers to be available for Skip Mode switching is
made with the Scan/Skip Mode setting under the F3 SET function
(see p. 32).
 When you are in Skip Mode, press:
Note: When you Skip, you only Skip to the previous or next available
computer that is in the Scan/Skip Mode selection (see p. 33).
 If a Port has been selected for Scan/Skip Mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
 While Skip Mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
 To exit Skip Mode, press [Spacebar] or [Esc].
←
To skip from the current port to the previous port in the List.
→
To skip from the current port to the next port in the List.
↑
To skip from the current port to the last port of the previous station in the
List.
↓
To skip from the current port to the first port of the next station in the
List.
cl12816_v2.book Page 38 Thursday, March 23, 2006 2:21 PM