Installation guide

20
21
When the system is in Local Mode, the Remote unit’s selection switch is inactive. Pressing it has no
effect – the Remote operator cannot take over control. The Remote selection switch only becomes
active after the Local selection switch is pressed to return the system to Auto Mode.
Likewise, if the system is in Remote Mode, the Local unit’s selection switch is inactive – the Local
operator cannot take over control. The Local selection switch only becomes active after the Remote
selection switch is pressed to return the system to Auto Mode.
Picture Compensation
The quality of the video display can deteriorate with distance. The Picture Compensation switches
adjust the picture quality of the remote console.
If it becomes necessary to adjust the video signal, press the plus button (+) to increase the video
signal gain; press the minus button (-) to decrease the video signal gain. The Picture Compensation
LED blinks until compensation has completed, at which time it remains illuminated.