SlideawayTM LCD Console CL1000 User Manual www.aten.
CL1000 User Manual FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
CL1000 User Manual User Information Online Registration Be sure to register your product at our online support center: International http://support.aten.com North America http://www.aten-usa.
CL1000 User Manual User Notice All information, documentation, and specifications contained in this manual are subject to change without prior notification by the manufacturer. The manufacturer makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the manufacturer's software described in this manual is sold or licensed as is.
CL1000 User Manual Package Contents Basic Package The basic CL1000 package consists of: 1 CL1000 with Standard Rack Mount Kit 1 Custom KVM Cable Set 1 Power Cord 1 User Manual* 1 Quick Start Guide Optional Equipment Depending on any optional equipment that you may have purchased, one of the following may be included in your package: Standard Rack Mount Kit - Long Easy-Installation Rack Mount Kit - Short Easy-Installation Rack Mount Kit - Long Check to make sure that all the components are
CL1000 User Manual Contents FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iii Online Registration . . . . . . . . . . .
CL1000 User Manual Appendix Safety Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Rack Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 International. . . . . . . . . . . . . . . . . . . . . . . .
CL1000 User Manual About this Manual This User Manual is provided to help you get the most from your CL1000 system. It covers all aspects of installation, configuration and operation. An overview of the information found in the manual is provided below. Chapter 1, Introduction, introduces you to the CL1000 system. Its purpose, features and benefits are presented, and its front and back panel components are described.
CL1000 User Manual Conventions This manual uses the following conventions: Monospaced Indicates text that you should key in. [] Indicates keys you should press. For example, [Enter] means to press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt]. 1. Numbered lists represent procedures with sequential steps. ♦ Bullet lists provide information, but do not involve sequential steps.
CL1000 User Manual This Page Intentionally Left Blank x
Chapter 1 Introduction Overview The CL1000 is a KVM console module that feature an integrated LCD panel, full keyboard, and touchpad in a 1U rack-mountable sliding housing. It was developed in response to the enormous popularity of the sliding console found on the CL1008 and CL1016 KVM switches. Those switches are made up of two major modules: the front-end sliding KVM Console module, and the backend KVM Switch module. The CL1000 is similar to the front-end Console module found on the CL1008 and CL1016.
CL1000 User Manual Features Integrated KVM console with a 17" LCD monitor in a sliding housing with top and bottom clearance for smooth operation in a 1U high system rack LCD module rotates up to 115o for a more comfortable viewing angle Standard rack mount kit included – optional Easy Rack Mounting (single person installation) rack mount kit available (requires separate purchase) Compatible with most PS/2 KVM switches Internal power supply High video resolution: Up to 1280 x 1024 @75Hz Sup
Chapter 1. Introduction Requirements Switches and Computers The CL1000 supports most KVM switches that have PS/2 console port connectors. If you are unsure whether your switch is supported or not, check with your dealer. The integrated LCD monitor's maximum resolution is 1280 x 1024 @ 75 Hz. Make sure that none of the resolution settings of the connected computers exceed the LCD monitor's maximum resolution.
CL1000 User Manual Components Front View 2 1 2 3 4 5 10 6 9 7 8 No. Component 4 Description 1 Handle Pull to slide the KVM module out; push to slide the module in. 2 Slide Release In order to slide the console out, you must first release it by moving this tab sideways. See page 11 for details on sliding the console in and out. 3 LCD Display After sliding the KVM module out, flip up the cover to access the LCD monitor.
Chapter 1. Introduction Rear View 1 2 No. Component 3 Description 1 Power Socket This is a standard 3-prong AC power socket. The power cord from your AC source plugs in here. 2 Power Switch This is a standard rocker switch that powers the unit On and Off. 3 KVM Port The cable that links the CL1000 to the KVM switch plugs in here.
CL1000 User Manual This Page Intentionally Left Blank 6
Chapter 2 Hardware Setup Before you Begin 1. Important safety information regarding the placement of this device is provided on page 17. Please review it before proceeding. 2. Make sure that power to all the devices you will be connecting up have been turned off. You must unplug the power cords of any computers that have the Keyboard Power On function. Standard Rack Mounting A standard rack mount kit is provided with your CL1000. The kit enables the console to be mounted in rack with a depth of 42–72 cm.
CL1000 User Manual To rack mount the console, do the following: 1. While one person positions the CL1000 in the rack and holds it in place, the second person loosely screws the front brackets to the rack. 2. While the first person still holds the CL1000 in place, the second person slides the L brackets into the CL1000's side mounting brackets from the rear until the bracket flanges contact the rack, then screws the L brackets to the rack. 3.
Chapter 2. Hardware Setup Installation Refer to the installation diagram as you perform the installation steps. The numbers in the diagrams correspond to the numbers of the steps. 1. Plug the SPHD connector end of the KVM cable provided with this unit into the CL1000's KVM port. 2. Plug the keyboard, monitor, and mouse connectors of the KVM cable into their respective ports on the Console Section of the KVM switch. 3. Plug the power cord into the CL1000's power socket and into an AC power source. 4.
CL1000 User Manual This Page Intentionally Left Blank 10
Chapter 3 Operation Opening the Console The CL1000's console is located under the top cover. To access the console, slide the console module out and raise the cover. Note: As a safety precaution, to keep the console from accidentally sliding out, the console is locked into the In position. Before you can pull the console module out, you must release it by pushing the catches on the unit's front panel as indicated below.
CL1000 User Manual Closing the Console To slide the console module back in, close the cover and do the following: 1. Pull the safety catches on the unit's side rails toward you and push the module in until it stops. 2. Release the catches. Pull the module slightly toward you, then push it all the way in. Note: The reason for the two step procedure is to minimize the chances of you pinching your fingers when sliding the module in.
Chapter 3. Operation Operating Precautions The maximum load bearing capacity of the keyboard module is 30 kg. Failure to heed the information below can result in damage to the keyboard module. Right! Rest your hands and arms lightly on the keyboard module as you work. Wrong! DO NOT lean your body weight on the keyboard module. DO NOT place heavy objects on the keyboard module.
CL1000 User Manual LCD OSD Configuration The LCD Buttons The LCD OSD allows you to set up and configure the LCD display. Four buttons are used to perform the configuration, as described in the table, below: Button MENU Function When you have not entered the LCD OSD Menu function, pressing this button invokes the Menu function, and brings up the Main Menu.
Chapter 3. Operation The Adjustment Settings An explanation of the LCD OSD adjustment settings is given in the table below: Setting Explanation Brightness Adjusts the background black level of the screen image. Contrast Adjusts the foreground white level of the screen image. Phase If pixel jitter or horizontal line noise is visible on the display, your LCD may have the wrong phase setting. Adjust the phase setting to eliminate these problems.
CL1000 User Manual This Page Intentionally Left Blank 16
Appendix Safety Instructions General Read all of these instructions. Save them for future reference. Follow all warnings and instructions marked on the device. To prevent damage to your installation it is important that all devices are properly grounded. Do not place the device on any unstable surface (cart, stand, table, etc.). If the device falls, serious damage will result. Do not use the device near water. Do not place the device near, or over, radiators or heat registers.
CL1000 User Manual (Continued from previous page.) If an extension cord is used with this device make sure that the total of the ampere ratings of all products used on this cord does not exceed the extension cord ampere rating. Make sure that the total of all products plugged into the wall outlet does not exceed 15 amperes. To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or un-interruptible power supply (UPS).
Appendix Rack Mounting Before working on the rack, make sure that the stabilizers are secured to the rack, extended to the floor, and that the full weight of the rack rests on the floor. Install front and side stabilizers on a single rack or front stabilizers for joined multiple racks before working on the rack. Always load the rack from the bottom up, and load the heaviest item in the rack first. Make sure that the rack is level and stable before extending a device from the rack.
CL1000 User Manual Technical Support International For online technical support – including troubleshooting, documentation, and software updates: http://support.aten.com For telephone support, see page iii. North America Email Support Online Technical Support support@aten-usa.com Troubleshooting Documentation Software Updates Telephone Support http://www.aten-usa.
Appendix Specifications Function Connector KVM Ports Switches Power CL1000 1 x SPHD-15 Female (Yellow) 1 x Rocker LCD Adjust 4 x Pushbutton Reset LEDs Power Lock Emulation 1 x Semi-recessed Pushbutton 1 (Dark Green) Num 1 (Green) Caps 1 (Green) Scroll 1 (Green) Keyboard / Mouse PS/2 Video 1280 x 1024 @ 75 Hz; DDC2B IP Rating 100–240 V AC; 50/60 Hz; 1 A Power Consumption Environment Operating Temp. Storage Temp.
CL1000 User Manual Optional Rack Mounting For convenience and flexibility, three optional rack mounting kits are available as shown in the following table: Bracket Type Size (cm) Standard Installation – Long 68.0–100.0 Easy Installation – Short 42.0–70.0 Easy Installation – Long 68.0–105.0 To install the long bracket standard rack mount kit, simply replace the short L brackets on the standard rack mount kit with the long ones, and mount the console according to the instructions given on page 7.
Appendix 2. Attach the left and right easy-installation mounting rails to the inside of the rack. The flange that supports the console will be to the inside. Rear Flange Slide Bar Sliding Attachment Bracket LEFT RAIL Support Flange Rear Flange RIGHT RAIL a) Screw the front flanges to the rack first. b) Slide the bars with the rear flanges toward the rack until the flanges make contact with the rack, then screw the rear flanges to the rack. (Continues on next page.
CL1000 User Manual (Continued from previous page.) 3. Slide the console onto the support flanges. Use the screws supplied with this package to loosely attach the front of the console to the front of the rack (only tighten the screws part way). Phillips I head M4 x 6 4. Slide the sliding attachment brackets along the slide bars until they contact the rear of the console, then use the screws supplied with this package to attach the bars to the rear of the console (tighten the screws all the way).
Appendix 5. Slide the console open and closed a couple of times to be sure that it is properly aligned and operating smoothly. (See page 11 for opening and closing procedures.) 6. After determining that the console is properly lined up and operating correctly, finish up by fully tightening down the partially tightened front attachment screws inserted in step 3. About SPHD Connectors This product uses SPHD connectors for its KVM and/or Console ports.
CL1000 User Manual Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR'S LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION. The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect to the contents or use of this documentation, and especially disclaims its quality, performance, merchantability, or fitness for any particular purpose.
Index C Cables, 3 Components Front View, 4 Rear View, 5 Conventions, ix D Dimensions, 21 E Easy-Installation kit, 22 Emulation DDC, DDC2, DDC2B, 2 F FCC Information, ii Features, 2 Front View, 4 I Installing, 9 IP Rating, 21 K KVM Port, 5 L LCD Buttons, 14 Display, 4 OSD configuration, 14 O Online Registration, iii Operating Precautions, 13 Operating Temp.
CL1000 User Manual SPHD Connectors, 25 Standard rack mounting, 7 Storage Temp.
