User Manual

Table Of Contents

CL3800 / CL3700 / CL3100 User Manual

To rack mount the CL3800 / CL3700 / CL3100, do the following:

1. Attach the left and right mounting brackets to the back of the rack,

installing four screws in the tabs to secure them in place.

2. While one person inserts the CL3800 / CL3700 / CL3100 into place by

sliding its left and right side bars into the mounting brackets (on the rack),

have a second person install four screws in the front tabs to secure the

module to the front of the rack.

Note: Allow at least 5.1 cm on each side for proper ventilation, and at least

12.7 cm at the back for the power cord and cable clearance.