User Manual

Table Of Contents

CL3800 / CL3700 / CL3100 User Manual

Connecting Up - CL3100

Refer to the example installation diagram below as you perform the following

steps:

1. Plug the VGA and audio connectors of a KVM cable into the KVM ports

located in the CPU section on the rear of the CL3100.

Note: The CL3100 supports speakers only. It does not support a

microphone. Connect the KVM cable’s speaker jack (green) to the

CL3100’s audio port.

2. Plug the USB, VGA, and audio connectors of the KVM cable into their

respective ports of a computer.

3. If you are installing an external console, plug your keyboard, mouse,

monitor, and speakers (microphone not supported) into their respective

ports on the Console Section of the CL3100.

4. Plug one end of the CL3100’s power cord into the CL3100's power socket,

and plug the other end into a power source.

5. Turn on the power to LCD Console.

6. Power on your PC.

Installation Diagram

DM4211!)Sfbs*

WHB