User Manual

CL3800 / CL3700 / CL3100 User Manual
32
Hotkeys
Console selection is accomplished with the following hotkey combinations:
Note: 1. Press the keys in sequence – one key at a time. First [Ctrl], then [Alt],
then [Shift], etc.
2. Console selections are not saved. If the CL3800 / CL3700 / CL3100
is powered off, it reverts to the default setting of both consoles
enabled when it is powered on again.
Combination Action Beeps LEDs
[Ctrl] [Alt] [Shift] [P] [C]
[Enter]
To select normal mode (pc, etc.). 2 None
[Ctrl] [Alt] [Shift] [M] [A] [C]
[Enter]
To select Mac 2 None
[Ctrl] [Alt] [Shift] [S] [U] [N]
[Enter]
To select SUN 2 None
[Ctrl] [Alt] [Shift]
[u] [p] [g] [r] [a] [d] [e]
[Enter]
Activates the Firmware Upgrade
Mode.
Note: this Hotkey sequence only
works when the Firmware Upgrade
Recovery Switch (see page 36) is in
the Normal position.
None 3
Flashing
when
upgrade
is in
process
[Ctrl] [Alt] [Shift] [L] [Enter] Enable Local (LCD) console; Disable
2nd console or external console
video.
2 None
[Ctrl] [Alt] [Shift] [R] [Enter] Enable 2nd console, or external
console video; Disable Local (LCD)
console.
2 None
[Ctrl] [Alt] [Shift] [L] [R]
[Enter] or
[Ctrl] [Alt] [Shift] [R] [L]
[Enter]
Enable both consoles (default). 2 None
[Ctrl] [Alt] [Shift] [U] [M]
[Enter]
Configures the front USB Port to
mouse mode (Mouse functionality is
immediate upon switching to USB
mouse mode). (USB mouse mode
[U] [M] is the default)
2 None
[Ctrl] [Alt] [Shift] [U] [P]
[Enter]
Configures the front USB Port to
peripheral mode.
2 None
[Ctrl] [Alt] [Shift] [F4]
[Enter]
Print the switch’s current settings via
a text editor or word processor.
None None