User Manual

CL3800 / CL3700 / CL3100 User Manual
36
Firmware Upgrade Mode
The CL3800 / CL3700 / CL3100’s firmware upgrade mode can be accessed
one of two ways: by entering a hotkey sequence (see Hotkeys, page 32), or by
placing the CL3800 / CL3700 / CL3100 in firmware upgrade recovery mode
(see Firmware Upgrade Recovery, page 41).
Note: In order to activate the Firmware Upgrade Mode using a hotkey
sequence, the Firmware Upgrade Recovery Switch (see page 9) must be
set to the Normal position.
1. Turn off the power to the CL3800 / CL3700 / CL3100 using the power
switch located on the back side of the console.
2. Slide the firmware switch to RECOVER (see page 9).
3. Turn on the power to the CL3800 / CL3700 / CL3100 using the power
switch located on the back side of the console.
When the CL3800 / CL3700 / CL3100 is in Firmware Upgrade Mode, the Num
Lock, Caps Lock and Scroll Lock LEDs will continually flash on and off.
To exit the Firmware Upgrade Mode, see Exiting Firmware Upgrade Mode,
page 41.