User Manual

Appendix
53
Optional Rack Mounting
For convenience and flexibility, three optional rack mounting kits for the
CL3800 are available as shown in the following table:
Three optional rack mounting kits for the CL3700 and CL3100 are available as
shown in the following table:
To install the long bracket standard rack mount kit, simply replace the short L
brackets on the standard rack mount kit with the long ones, and mount the
CL3800 / CL3700 / CL3100 according to the instructions given for The LCD
KVM switch is designed for rack mounting. If the KVM switch is not rack
mounted be sure to place it on a completely flat and firm surface before pulling
the device in or out to prevent damage due to uneven force on the module.,
page 16.
While it takes two people to perform a standard installation, with an Easy-
Installation, kit, one person can mount the CL3800 / CL3700 / CL3100. To
install the Easy-Installation kit, do the following:
1. Remove the right and left standard sliding brackets from both sides of the
CL3800 / CL3700 / CL3100.
Bracket Type Size (cm)
Easy Installation – Short (2X-041G) 45.0—70.0
Easy Installation – Long (2X-042G) 68.0—105.0
Bracket Type Size (cm)
Easy Installation – Short (2X-041G) 42.0—70.0
Easy Installation – Long (2X-042G) 68.0—105.0
L Bracket
L Bracket
R Bracket
R Bracket