Product Data Sheet / Brochure
Benets
USB Port
Extra USB mouse port
Fingerprint Identication *
An additional USB port located under the LCD panel is available to connect
peripheral devices (ash drive, CD-ROM drive, etc.) to the switch. USB
peripherals can be used to install software, OS patches, or make system
backups to computers connected to the installation from the CL5708 / CL5716.
For added convenience, a USB mouse port is provided for users who prefer to
use an external mouse.
The ngerprint reader can be used as an alternate means of logging in to the
switch. From 1 to 4 ngers can be scanned for each user and the
administrator, with any one of the recorded ngerprints used to log in.
Flexibility
Multilanguage support
Broadcast mode
The LCD module rotates up to 115 degrees for a more comfortable viewing
angle.
The CL5708/CL5716 supports the following OSD languages: English, German,
Japanese, Traditional Chinese and Simplied Chinese.
When this function is in eect, commands sent from the console are broadcast
to all available computers on the installation.This function is particularly useful
for operations that need to be performed on multiple computers, such as
performing a system wide shutdown, installing or upgrading software, etc.
A
A
B
B C
C
No software required – convenient computer selection via front panel pushbuttons, hotkeys and
multilingual on-screen display (OSD) menus
Auto-senses station's position on daisy-chained installations; no need for manual dip switch
setting; front panel led indicates station's position
Port names automatically recongured when station sequence is changed
Two level password security – only authorized users can view and control computers
Supports one administrator and four user accounts with separate proles
Auto Scan mode enables continuous monitoring of user-selected computers
Broadcast support – commands from the keyboard can be broadcast to all available computers
on the installation
Hot pluggable – add or remove computers without having to power down the switch
Beeper on/o via hotkey and OSD
Firmware upgrades to all the chained KVM switches at the same time via the daisy-chain cable
* Models with Fingerprint, Identication Reader Only.