User Manual

Chapter 1. Introduction
5
Components
Front View
No. Component Description
1 Upper Handle Pull to slide the LCD module out; push to slide the module in.
See Opening the Console, page 17, for details on sliding the
console in and out.
2 LCD Module See LCD Module, page 7.
3 Exit / Light
Pushbutton
Press this pushbutton for two seconds to turn the LED
Illumination Light On or Off. (Default: On)
During the LCD OSD mode, this pushbutton has more
functions, refer to EXIT on page 24 for more details.
4 Keyboard Module See Keyboard Module, page 6.
5 Lower Handle Pull to slide the keyboard module out. See Opening the
Console, page 17, for more details on sliding the console in
and out.
6 Power LED Lights (blue) to indicate that the unit is receiving power.
7 LCD Release
Catch
These catches (one on each side) release the LCD module
so you can slide it away.
8 Rack Mounting
Tabs
The rack mounting tabs located at each corner of the unit
secure the chassis to a system rack. See Standard Rack
Mounting, page 10, for details.
9 LED Illumination
Light
Illuminates the keyboard and touchpad to allow visibility in
low-light conditions.
7
8
9
4
5
6
1
2
EXIT / LIGHT
3