User manual

Chapter 6. OSD Operation
51
DCC
Up to four units can be daisy chained in one installation and users can switch
the keyboard and mouse between up to 16 computers. In DCC when you switch
to a computer on a different station only the keyboard and mouse control is
switched. The video display will not change as the video can not be passed
across two CM1164’s. Connect a display to each CM1164 in a daisy chain.
Use the DDC screen to select a Station on the daisy chain and the Port number
of the computer to connect to, then click Select.
Note: Only stations in the daisy chain are shown on the screen – if there are
only two units in the chain, stations 3 and 4 are grayed out.