User manual

Chapter 6. OSD Operation

Hardware Cursor Mode

The Hardware Cursor Mode allows use of the Channel Editor. The Channel

Editor provides a way to change display modes and other settings with the

mouse and an on-screen control panel. For details on how to use the Channel

Editor, see Channel Editor, page 35.

Mouse Emulation must be enabled for Hardware Cursor Mode to work (see

Mouse Emulation, page 62).

When Hardware Cursor Mode is enabled, you must press [Scroll Lock] 3 times

to enter the OSD menu.

 Enable. Allows the Channel Editor functions to work.

 Channel Wheel Mode. Starts the Channel Editor by holding down the

mouse wheel for 3+ seconds.

 Cursor Type. Check A for a white mouse cursor, or B for a black mouse

cursor for when the Channel Editor or OSD menu is triggered. This can

help you know when you are in normal PC mode or Channel Editor/OSD

mode.

 Click Save to apply the settings.