User manual
Table Of Contents
- CN6000
- FCC Information
- User Notice
- Safety Instructions
- Package Contents
- About this Manual
- Conventions
- ATEN Information
- Introduction
- Hardware Setup
- Getting Started
- Administration
- The Windows Client
- The Java Client
- The Log File
- AP Operation
- Appendix
- Index
8. AP Operation
59
IP Address:
The CN6000 can either have its IP address assigned dynamically at bootup
(DHCP), or it can be given a fixed IP address.
For dynamic IP address assignment, select the Obtain an IP address
automatically, radio button.
To specify a fixed IP address, select the Set IP address manually, radio
button and fill in the required information. See IP Address
Determination, page 90, for detailed information on assigning a fixed
IP address
The CN6000 can either have its DNS address assigned automatically, or a
fixed address can be specified.
For automatic address assignment, select the Obtain DNS server
address automatically, radio button.
To specify a fixed address, select the Use the following DNS server
address, radio button and fill in the required information.
Log Server:
Important transactions that occur on the CN6000, such as logins and internal
status messages, are kept in an automatically generated log file. Specify the
MAC address and a Port number for the server you want the log file to reside
on in the Log Server section. The Log Server is discussed in detail on page 79.
Note: The Log Server port number must be different from the port numbers
that were specified for Program and Java in the Access Ports section.
cn6k_2007-02.book Page 59 Wednesday, February 28, 2007 9:26 AM