User manual

9. AP Operation
75
The Windows Client Connection Screen
A description of the Connection Screen is given in the following table:
Item Description
Server List
Each time the CN8000
iClient program is run, it searches
the user's local LAN segment for CN8000 units, and lists
whichever ones it finds in this box. If you want to connect to
one of these units, select it, then click Login. When you have
finished with your session, Click Logout to end the
connection.
Server This area is used when you want to connect to a CN8000 at a
remote location. If the IP address that appears isn’t the one
you want, or if there is no entry at all, key in the IP address
you want.
Next, key in the Port number in the Port field. If you don't
know the Port number, contact the Administrator.
When the IP address and Port number for the unit you wish to
connect to have been specified, click Login to start the
connection. When you have finished with your session, Click
Logout to end the connection.
Login Starts the connection to the CN8000.
Logout
These buttons become active once you log into the CN8000.
See page 77 for details.
Remote View
Change Password
Admin Utility
cn8000.book Page 75 Tuesday, July 1, 2008 4:18 PM