User manual

4. Administration
31
DNS Server
The CN8000 can either have its DNS server address assigned automatically, or
a fixed address can be specified.
 For automatic DNS Server address assignment, select the Obtain DNS
server address automatically, radio button.
 To specify a fixed address, select the Use the following DNS server
address, radio button and fill in the required information.
Note: Specifying at the alternate DNS Server address is optional.
Network Transfer Rate
This setting allows you to tailor the size of the data transfer stream to match
network traffic conditions by setting the rate at which the CN8000 transfers
data to remote computers. The range is from 4–99999 Kilobytes per second
(KBps).
Finishing Up
After making any network changes, be sure Reset on exit on the Customization
page (see Customization, page 58) has been enabled (there is a check in the
checkbox), before logging out. This allows network changes to take effect
without having to power the CN8000 off and on.