User manual

Powering On / Off and Restarting
!
Power On
Turn the power to the Master View before turning on the power to the
computers.
!
Power Off
If it becomes necessary to Power Off one of the Master View units,
before starting it back up you must do the following:
1. Shut down all the computers that are attached to the unit, as well as
all the stations and all the computers that are daisy chained down
from it (all the child stations and the computers attached to them).
Note: 1. You must unplug the power cords of any computers that
have the Keyboard Power On function that are connected
to the shut down switches. Otherwise, the switches will still
receive power from the computers.
2. If the unit is operating under external power, unplug the
power adapter cable.
2. Wait 10 seconds, then plug the Master View stations back in, starting
with the last station in the chain and working back to the station you
originally shut down.
3. After all the Master View’s are up, power On the computers, starting
with the ones attached to the last station in the chain and working
back to the station you originally shut down.
Note: It is not necessary to shut down and restart any of the stations
or computers above the station you powered off.
2001-06-9
12 CS-1004 / CS-1008 / CS-1016 User Manual