User manual

OSD Menu Navigation
w
[Esc] cancels the current selection, or dismisses the current menu and
moves back to the menu one level above. If you are at the highest menu
level, it deactivates OSD.
w
Use the Up and Down Arrow Keys or click on the Up and Down Triangle
symbols (
st) to move up or down through the list one line at a time.
w
Use [Pg Up] and [Pg Dn] or click on the Up and Down Arrow symbols
(ÇÈ) to move up or down through the list one screen at a time.
w
To activate a port, move the Highlight Bar to it then press [Enter].
w
After executing any action, you automatically go back to the menu one
level above.
OSD Hotkey Navigation
Hotkey navigation can also be used under OSD as follows:
1. From the OSD Main Menu, press [Ctrl]+[Alt]+[Shift].
2. Key in the Port ID for the computer you wish to access (see Port ID
Numbering, above), then press [Enter].
The console now controls the computer that you have selected, and the OSD
automatically closes.
When you use this method, note the following:
w Although access switches to the port you just specified, the highlight bar
on the OSD screen doesn’t move.
w You must press [Ctrl], [Alt], [Shift] one after the other - not all at the
same time.
w After pressing the [Ctrl]+[Alt]+[Shift] combination, you must key in the
Port ID and press [Enter] within 1 second for each keypress.
w The keys must be pressed and released one key at a time.
w Number keys must be pressed from the regular keyboard; not from the
numeric keypad.
w If you submit an incorrect Port ID, an error message displays, and you
are returned to the OSD Main Menu.
16 CS-128A User Manual