User manual

Introduction
Front View
1. Port LEDs
On Line: Lights ORANGE to indicate that the computer attached to the
corresponding port is up and running. If the LED is flashing, it
indicates that the Port is being used for Cascading to another
Master View switch.
Selected: Lights GREEN to indicate the currently selected port. The LED
is steady under normal conditions, but flashes when its port is
accessed under Auto Scan mode.
2. Auto Scan Button
Pressing this button starts Auto Scan Mode.
3. Port Selection Switches
Press a switch to access the computer attached to the corresponding port.
w Pressing Buttons 1 and 2 simultaneously for 3 seconds performs a Key-
board and Mouse reset.
w Pressing Buttons 7 and 8 simultaneously starts Auto Scan Mode.
4. Reset
Use a thin object (such as the end of a paper clip, or a ballpoint pen), to
briefly press this recessed switch in to initiate a warm reset of the CS-128A.
If the switch is kept in for a longer period, a cold reset takes place.
5. Sound Opening
System sounds (beeps, etc.), are emitted from this opening.
21
3 4 5
4 CS-128A User Manual