User manual

CS-1762 / CS-1764 User Manual

CS-1764 Front View

1. Port Selection Switches

 Press a switch for longer than two seconds to bring the KVM, USB

hub, and audio focus to the computer attached to its corresponding

port.

 Press a switch for less than two seconds to bring only the KVM focus

to the computer attached to its corresponding port.

 Press switches 1 and 2 simultaneously for 2 seconds to start Auto Scan

Mode, see page 16 for details.

2. Port LEDs

The Port LEDs are built into the Port Selection Switches. The upper ones

are the KVM Port LEDs; the lower ones are the USB LEDs:

KVM

 Lights DIM ORANGE to indicate that the computer attached to the

corresponding port is up and running (On Line).

 Changes to BRIGHT ORANGE to indicate that the computer attached

to its corresponding port is the one that has the KVM focus (Selected).

 Flashes to indicate that the computer attached to its corresponding port

is being accessed under Auto Scan mode.

USB

 Lights GREEN to indicate that the computer attached to its

corresponding port is the one that has access to the USB peripherals.

3. USB Console Ports

Your USB keyboard and USB mouse plug in here.

1&2

cs1762.book Page 6 Friday, February 17, 2006 10:21 AM