User manual

CS-1762 / CS-1764 User Manual
16
Auto Scanning
The CS-1762 / CS-1764’s Auto Scan feature automatically cycles the KVM
focus through the computer ports at regular intervals. This allows you to
monitor the computer activity without having to take the trouble of switching
from port to port manually. See the table below for details.
Note: 1. The n stands for the number of seconds that the CS-1762 / CS-1764
should dwell on a port before moving on to the next. Replace the n
with a number between 1 and 99 when entering this hotkey
combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended - only Auto Scan Mode compliant keystrokes
and mouse clicks can be input. You must exit Auto Scan Mode in
order to regain normal control of the console.
3. Although the video focus switches from port to port, the keyboard,
mouse, and USB focus doesn’t switch. They stay at the port they were
on when Auto Scanning started.
cs1762.book Page 16 Friday, February 17, 2006 10:21 AM