User manual

CS-1762 / CS-1764 User Manual
20
List Hotkey Settings
To see a listing of the current hotkey settings, do the following:
1. Invoke HSM (see page 17 for details).
2. Press and release the F4 function key.
3. Open a text editor or word processor and use its Paste function to display
the settings.
USB Reset
If the USB loses focus and needs to be reset, do the following:
1. Invoke HSM (see page 17 for details).
2. Press and release the F5 function key.
Hotkey Beeper Control
The Beeper can be hotkey toggled On and Off. To toggle the Beeper, do the
following:
1. Invoke HSM (see page 17
).
2. Press and release the B key.
The Beeper toggles On or Off. The Command Line displays Beeper On or
Beeper Off for one second; then the message disappears and you automatically
exit Hotkey Mode.
Disable Port Switching Keys
To disable the Port Switching Keys ([Scroll Lock] [Scroll Lock] / [Ctrl] [Ctrl]),
do the
following:
1. Invoke HSM (see page 17 for details).
2. Press [X] [Enter].
Note: This procedure is a toggle. To enable the Port Switching keys repeat
steps 1 and 2.
cs1762.book Page 20 Friday, February 17, 2006 10:21 AM