User manual

4. Hotkey Operation
13
Auto Scanning
The CS1762 / CS1764’s Auto Scan feature automatically cycles the KVM
focus through the computer ports at regular intervals. This allows you to
monitor the computer activity without having to take the trouble of switching
from port to port manually. See the table below for details.
Note: 1. The n stands for the number of seconds that the CS1762 / CS1764
should dwell on a port before moving on to the next. Replace the n
with a number between 1 and 99 when entering this hotkey
combination.
2. While Auto Scan Mode is in effect, ordinary keyboard and mouse
functions are suspended – only Auto Scan Mode compliant
keystrokes and mouse clicks can be input. You must exit Auto Scan
Mode in order to regain normal control of the console.
3. Although the video focus switches from port to port, the keyboard,
mouse, and USB focus doesn’t switch. They stay at the port they were
on when Auto Scanning started.
Hotkey Setting Mode
Hotkey Setting Mode is used to set up your CS1762 / CS1764 switch
configuration. All operations begin with invoking Hotkey Setting Mode
(HSM).
Invoking HSM
To invoke HSM do the following:
1. Press and hold down the Num Lock key
2. Press and release the minus key
3. Release the Num Lock key
Note: 1. There is an alternate key combination to invoke HSM. See page 15
for details.
2. The minus key must be released within one half second, otherwise
Hotkey invocation is canceled.