User manual

CS1182 / CS1184 User Manual
6
No. Component Description
1 Port Selection
Pushbuttons
Pressing a Port Selection Pushbutton brings the focus
to the computer attached to its corresponding port.
2 Port LEDs The Port LEDs are built into the Port Selection
Pushbuttons.
Online – Lights green to indicate that the computer
attached to its corresponding port is up and running.
Note: The green light for a given port is lit for as long
as there is a powered on USB connection between the
KVM switch and computer.
Selected – Lights orange to indicate that the computer
attached to its corresponding port has the KVM.
Note: The Selected LEDs will flash constantly when a
chassis intrusion is detected. See Chassis Intrusion
Detection, page 12 for further details.
3 Reset Button Press this to reset the CS1182 / CS1184 to the default
settings.
4 Audio Ports The cables from your main speakers and main
microphone plug in here. The speakers and
microphone plugged in here have priority over those in
the rear panel.
5 Power LED Lights blue to indicate that the CS1182 / CS1184 is
powered on.
6 USB Console Ports Your USB keyboard and mouse plug into these ports.
7 Audio Ports The cables from your main speakers and main
microphone plug in here. The speakers and
microphone plugged in here have priority over those in
the rear panel.
8 Console Monitor Port The cable from your console monitor plugs in here.
9 KVM Port Section The custom KVM cables that attach to your computers
plug in here.
10 Power Switch The power adapter cable plugs in here.
11 Power Socket This is a standard rocker switch that powers the
CS1182 / CS1184 on and off.
12 Grounding Screw See Grounding, page 8 for further details.