User manual
Table Of Contents
- CS1308 / CS1316 User Manual
- Introduction
- Hardware Setup
- Basic Operation
- OSD Operation
- Keyboard Port Operation
- Keyboard Emulation
- The Firmware Upgrade Utility
- Appendix
Chapter 2. Hardware Setup
9
Rack Mounting – Front
1. Remove the screws from the left and right side panels near the front of the
switch (2 screws total).
2. Use the M3 x 8 Phillips hex head screws supplied with the rack mount kit
to screw the rack mounting brackets onto the side panels near the front of
the unit.
(Continues on next page.)