Manualshelf

User manual

ManualsBrandsATEN ManualsSwitches & Hubs8 ports KVM changeover switch VGA USB, PS/2 2048 x 1536 pix CS1708A-AT-G
11121314151617181920
Chapter 2. Hardware Setup
9
Rack Mounting – Front
1. Remove the screws from the left and right sides of the switch (2 screws
total) near the front of the switch.
2. Use the M3 x 8 Phillips hex head screws supplied with the rack mounting kit
to screw the rack mounting brackets into the sides near the front of the unit.
(Continues on next page.)