User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
1. Introduction
3
Features
2/4-port KVMP switch with USB 2.0 support and 2.1 channel surround
sound audio
One console controls 2 (CS1732
B ) or 4 (CS1734B ) computers and two
additional USB devices
2-port USB 2.0 hub built in
Dual interface – supports computers with PS/2 or USB keyboard and
mouse configurations
Audio-enabled – full bass response provides a rich experience for 2.1
channel surround sounds systems
Console audio ports on front panel for easy access – ideal for IP phone use
Independent switching of KVM, USB, and Audio focus
Superior video quality; 2048 x 1536; DDC2B
Supports widescreen resolutions
Computer selection via front panel pushbuttons, OSD (On Screen
Display), hotkeys, and mouse
Multiplatform support – Windows 2000/XP/Vista, Linux, Mac, and Sun
Console mouse port emulation / bypass feature supports full mouse driver
and multifunction mice
Video DynaSync – stores the console monitor’s EDID (Extended Display
Identification Data) to optimize display resolution
Complete keyboard emulation for error free booting
Sun/Mac keyboard support and emulation*
Auto Scan Mode for monitoring all computers
LED display for easy status monitoring
Easy installation – no software required
* 1. PC keyboard combinations emulate Sun/Mac keyboards
2. Sun/Mac keyboards only work with their own computers