User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
1. Introduction
7
No. Component Description
1Port
Selection
Pushbuttons
Pressing a front panel pushbutton brings the focus to the
computer attached to its corresponding port.
There are two settings for Front Panel Pushbutton Switching
Operation: MODE 1 (Default Setting) and MODE 2 (Alternative
Setting). The F4:SET function in the OSD allows you choose
between these two settings. See F4: SET, page 31.
For full details of the MODE 1 (Default) and MODE 2
(Alternative) Front Panel Pushbutton Switching Operation
settings, see BUTTON SETTINGS, page 32.
2 Port LEDs The Port LEDs are built into the Port Selection Switches. The
upper ones are the KVM Port LEDs; the lower ones are the
USB LEDs:
KVM:
Lights DIM ORANGE to indicate that the
computer attached to its corresponding port is up
and running (On Line).
Changes to BRIGHT ORANGE to indicate that
the computer attached to its corresponding port is
the one that has the KVM focus (Selected).
Flashes to indicate that the computer attached to
its corresponding port is being accessed under
Auto Scan mode.
USB:
Lights DIM GREEN to indicate that there is a
USB cable connection to the computer attached
to its corresponding port. Does not light if there is
no USB connection to the computer.
Changes to BRIGHT GREEN to indicate that the
computer attached to its corresponding port is the
one that has access to the USB peripherals.
3 Console
Connectors
(Audio)
Your main console microphone and speakers plus in here.
These audio ports have priority over the ports in the rear panel.
4 USB 2.0
Peripheral
Port
USB peripherals (printers, scanners, etc.) can plug into either
port.