User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
4. Keyboard Port Operation
21
Going Directly to a Port
Note: The n stands for the computer’s Port ID number (1, 2, 3, 4). Replace the
n with the appropriate Port ID when entering hotkey combinations.
Hotkey Action
[Num Lock] + [-]
[Enter]
Brings the KVM, USB hub, and audio focus from the port that currently
has the KVM focus to the next port on the installation (1 to 2; 2 to 1 for
the CS1732B; 1 to 2; 2 to 3; 3 to 4; 4 to 1 for the CS1734B).
Note: The KVM, USB hub, and audio focus all go to this port even if
they were on different ports to begin with.
[Num Lock] + [-] [K]
[Enter]
Brings only the KVM focus from the port that currently has it to the next
port on the installation. The USB hub and audio focus remain where
they are.
[Num Lock] + [-] [U]
[Enter]
Brings only the USB hub focus from the port that currently has it to the
next port on the installation. The KVM and audio focus remain where
they are.
[Num Lock] + [-] [S]
[Enter]
Brings only the audio focus from the port that currently has it to the next
port on the installation. The KVM and USB hub focus remain where they
are.
[Num Lock] + [-] [n]
[Enter]
Brings the KVM, USB hub, and the audio focus to the computer
attached to the port corresponding to the specified Port ID.
Note: The KVM, USB hub, and audio focus all go to this port even if
they were on different ports to begin with.
[Num Lock] + [-] [n] [K]
[Enter]
Brings only the KVM focus to the computer attached to the specified
port. The USB hub and audio focus remain where they are.
[Num Lock] + [-] [n]
[U] [Enter]
Brings only the USB hub focus to the computer attached to the
specified port. The KVM and audio focus remain where they are.
[Num Lock] + [-] [n] [S]
[Enter]
Brings only the audio focus to the computer attached to the specified
port. The KVM and USB hub focus remain where they are.
[Num Lock] + [-] [n] [K]
[U] [Enter]
Brings the KVM and USB hub focus to the computer attached to the
specified port. The audio focus remains where it is.
[Num Lock] + [-] [n] [K]
[S] [Enter]
Brings the KVM and audio focus to the computer attached to the
specified port. The USB hub focus remains where it is.
[Num Lock] + [-] [n]
[U] [S] [Enter]
Brings the USB hub and audio focus to the computer attached to the
specified port. The KVM focus remains where it is.
[Num Lock] + [-] [n] [K]
[S] [U] [Enter]
Brings the KVM, USB hub, and the audio focus to the computer
attached to the port corresponding to the specified Port ID.
Note: This is the same action as [Num Lock] + [-] [n] [Enter]