User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
CS1732B / CS1734B User Manual
26
Hotkey Summary Table
[Num Lock] + [-] [Enter] Brings the KVM, USB hub, and audio focus from
the port that currently has the KVM focus to the
next port on the installation.
[Port ID]
[Enter]
Switches access to the computer that corresponds
to that Port ID.
[K] or [U] or
[S] [Enter]
Brings only the KVM or USB hub or audio focus
from the port that currently has it to the next port
on the installation.
[Port ID] [K] or
[U] or [S]
Brings the KVM or USB hub or audio focus to the
computer attached to the corresponding port.
[A] [n] Sets the Auto Scan interval to n seconds – where
n is a number from 1–255.
[A] Invokes Auto Scan Mode.
[←] Invokes Skip Mode and Skips from the current port
to the first accessible port previous to it.
[→] Invokes Skip Mode and Skips from the current port
to the next accessible port.
[↑] Invokes Skip Mode and Skips from the current port
to the last accessible port of the previous Station.
[↓] Invokes Skip Mode and Skips from the current port
to the first accessible port of the next Station.
[D] Invokes Video DynaSync so the CS1732
B /
CS1734
B stores the console monitor’s EDID.
[F4] Lists the current OSD settings via the Paste
function of a text editor, including
a) Hotkey
b) OSD Hotkey
c) Port OS
d) Mouse Emulation
e) Button Settings
[F5] Performs USB Keyboard and Mouse reset.
[H] Toggles between the default and alternate HSM
invocation keys.
[T] Toggles between the default and alternate OSD
Invocation keys.