User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
CS1732B / CS1734B User Manual
28
OSD Navigation
The KVM, USB, Audio, and PN columns can be selected with the mouse.
Using the mouse allows you to select single or multiple columns. Click the
mouse or press [Enter] on your keyboard to switch KVM, Audio or USB
focus to the highlighted port. The OSD will disappear briefly and a Check
Box will appear on the selected port at next OSD startup.
Note: Clicking on the PN column selects the KVM, USB and Audio
columns at the same time. However, simply click on the KVM, USB
and Audio columns to configure them one by one.
The KVM, USB, Audio, and PN columns can also be selected using the
Up and Down keys on your keyboard to move the Highlight Bar down the
list on the screen. When the Highlight Bar is on the port to which you want
to switch KVM, Audio and USB focus, press [Enter] or click the left
button of the mouse. The OSD will disappear briefly and a Check Box will
appear on the selected port at next OSD startup.
The Left and Right keys on your keyboard let you select the KVM, USB
and Audio either individually or together. Cycle through KVM, USB,
Audio or All using either the left or right keys. When the Highlight Bar is
on the port to which you want to switch KVM, Audio or USB focus, press
[Enter] or click the left button of the mouse. The OSD will disappear
briefly and a Check Box will appear on the selected port at next OSD
startup.
In the Name column, use the Up and Down keys on your keyboard or the
mouse to select a port. Once a port has been selected, you can edit its name
after double clicking with the mouse or pressing [F2].
To exit the Main Screen/Port Display, press [Esc] or click the right button
of the mouse. The OSD will disappear and the original computer screen
will be displayed. Settings will not be stored on exit.
To store settings on exit, press [Enter] or move to the cursor to the central
yellow area or the Highlight Bar and double click with the left button of
the mouse. Then exit as outlined above.