User Manual
Table Of Contents
- CS1732B / CS1734B User Manual
- Introduction
- Hardware Setup
- Basic Operation
- Keyboard Port Operation
- OSD Operation
- OSD Overview
- OSD Navigation
- OSD Main Screen Headings
- OSD Functions
- F3: SCAN
- F4: SET
- 1. SET TIMEOUT to ON. Key in a value from 1-30 minutes. If SET TIMEOUT is set to OFF, you will not be able to set the SCREEN BLANKER.
- 2. Set the SCREEN BLANKER password. Key in a password that is 8 characters long (allowed characters are A-Z and 0-9). If you have not changed the default password, you can press [Enter] to cancel SCREEN LOCK.
- 3. Set the SCREEN LOCK to ON. Key in Y. If the SCREEN LOCK function is set to ON, a password is needed to the leave the SCREEN BLANKER mode and return to the OSD.
- Keyboard Emulation
- The Firmware Upgrade Utility
- Before you Begin
- 2. Choose the Firmware Upgrade Package you want to install (usually the most recent), and download it to your computer.
- 3. Use the Firmware Upgrade Cable provided to connect a COM port on your computer to the Firmware Upgrade Port of your switch.
- 4. Shut down the computers on your CS1732B / CS1734B installation.
- 5. Invoke Firmware Upgrade Mode (see FIRMWARE UPGRADE, page 33).
- Starting the Upgrade
- Upgrade Succeeded
- Upgrade Failed
- Before you Begin
- Appendix
CS1732B / CS1734B User Manual
44
Factory Default Settings
Pushbuttons and Hotkeys
OSD
Setting Default
Port Switching [Number Lock] [-] [Enter]
Invoking HSM [Number Lock] [-]
Auto Scan Interval 5 seconds
Port Switching Keys Enabled
Setting Default
OSD Hotkey [Scroll Lock] [Scroll Lock]
Keyboard Port Hotkey [Num Lock] + [-]
Button Settings Mode 1
Port Display Duration 0 Seconds
Scan Duration 5 Seconds
Screen
Blanker
Set Timeout OFF (Disabled)
Screen Blanker
Password
“Blank”
Screen Lock OFF (Disabled)
Hotkey Command Mode ON
Activate Beeper ON
Port OS PC
Mouse Emulation ON
Mouse Switching Function OFF
OSD Language ENGLISH